Manual

11
Adjust Watering
Adjust Watering is used to increase or decrease the amount of time a zone(s) will water.
Step 1 – Press the WATER NOW button.
Step 2 – Use the Up or Down arrows to select the schedule you want to adjust.
ADJUST WATER
SCHEDULE A
SCHEDULE B
Step 3 – Press the Right arrow to navigate to the next screen. Choose from the two options.
ADJUST WATER
ALL ZONES (%)
BY ZONE
Option 1
“All Zones (%)” – Runtimes for All zones on the selected schedule will increase/decrease by the selected percentage. Adjust
the watering percentage from 150% to -95% or OFF.
– Press the Right arrow to select this option.
ADJUST WATER
ALL ZONES (%) –––
– Use the Up or Down arrows to increase or decrease the runtime percentage (%).
– Press SELECT .
All runtimes for selected schedule will now reect the percent adjustment.
Example: Original runtime = 10 minutes
Adjustment of +50% = 15 minutes
Adjustment of -50% = 5 minutes
Option 2
“By Zone” – Runtimes may be adjusted in minutes for individual zones.
– Use the Up or Down arrows to select BY ZONE.
ADJUST WATER
ZONE 1 00:05
ZONE 2 00:05
ZONE 3 00:10
– Press SELECT to activate.
– Use the Up or Down arrows to select the zone you want to adjust.
– Press SELECT to access the runtime.
– Use the Up or Down arrows to increase or decrease the amount of runtime. Adjustment can be made from OFF to
12 hours in 1-minute increments.
Review
e Review function allows you to view programming for all active irrigation scheduler and sensors. is is a view only screen, no
adjustment can be made in these screens.
Step 1 – Press the REVIEW button.
REVIEW
SCHEDULE A
SCHEDULE B
RAIN SENSOR
Step 2 – Press the Up or Down arrows to select the schedule you want to view. Press SELECT to access.
REVIEW
SCHEDULE A
S M T W T F S
–
–
TOTAL RUNTIME 02:10
STARTS 6:00AM
In this example, Schedule A is set to water every day , except Saturday and Sunday (indicated by –). e total runtime for this
schedule is 2 hours and 10 minutes. It is the total runtime accumulated by all the zones’ runtime for a single schedule run.
e Total Runtime is the duration in which the zone will run during a watering day taking into account the number of starts as
well as any watering adjustments.
Step 3 – To review individual zone runtimes, the Right arrow.
Step 4 – Press the HOME button to return to the main screen.