Manual

16
Interval Day Scheduling
Selecting Interval watering allows you to specify the number of days between watering. For example, selecting an interval of 3 will prompt
the controller to water every 3rd day. Select interval from 1–31 days.
Step 1 – While in the ADVANCED/SCHEDULE DETAILS menu, use the Up
or Down arrows to select the Schedule you
want to edit. Press SELECT .
Step 2 – Use the Up or Down arrows to navigate to TYPE. Press SELECT .
Step 3 – Use the Up or Down arrows to select INTERVAL. Press SELECT .
Step 4 – Use the Right arrow to navigate to WATERS EVERY designation. Modify using the Up or Down arrows.
Press SELECT to save and advance to the next parameter.
INTERVAL
WATERS EVERY 03 DAYS
CURRENT DAY 01
WATERS ON LAST DAY
OF INTERVAL
Step 5 – e CURRENT DAY designation represents the present day within the interval schedule. Enter 1 for rst day, 2 for second
day, 3 for third day, etc. Press SELECT to save. For example, if you want to water every 3 days, set the WATERS EVERY
designation to 3. If you want the watering to occur tomorrow (the next day), set the current day to “2”.
INTERVAL
WATERS EVERY 03 DAYS
CURRENT DAY 02
WATERS ON LAST DAY
OF INTERVAL
Set Watering Restrictions
Restrictions function allows you to select the day and time frame you do not want any scheduled watering activity.
Note: ere is only one time frame that can be set and it will apply to all the restricted days for each schedule.
Restriction Days
Step 1 – While in the ADVANCED/SCHEDULE DETAILS menu, use the Up
or Down arrows to select the Schedule you
want to edit. Press SELECT .
Step 2 – Use the Up or Down arrows to navigate to RESTRICTIONS. Press SELECT .
Step 3 – Use the Up or Down arrows to navigate to RESTRICTION DAYS. Press SELECT .
Step 4 – Use the Left or Right arrows to navigate through the days of the week.
RESTRICTION DAYS
S M T W T F S
TODAY IS THURSDAY
Use the Up or Down arrows to restrict watering . To activate watering,
select for that day. Press SELECT to save.
Restriction Time
Step 1 – While in the ADVANCED/SCHEDULE DETAILS menu, use the Up
or Down arrows to select the Schedule you
want to edit. Press SELECT .
Step 2 – Use the Up or Down arrows to navigate to RESTRICTIONS. Press SELECT .
Step 3 – Use the Up or Down arrows to navigate to RESTRICTION TIME. Press SELECT .
Step 4 – Use the Up or Down arrows to select START or STOP. Press SELECT . Use the Left or Right arrows to
navigate between the hours, minutes, AM/PM. Use the Up or Down arrows to adjust the time. Press SELECT
to save. e EVOLUTION
®
controller will not allow any schedules to activate between the start time and the stop time during
restricted days.
RESTRICTION TIME
START 10:00AM
STOP 03:00PM
Note: Scheduled watering that continues into a restricted day will stop at the time the restriction starts and will not
resume after the stop time.