Performance
EVOLUTION
®
Firmware Update
Installation Guide for Updating Firmware
EVOLUTION
®
Firmware Update
Installation Guide for Updating Firmware
Prepare the USB drive
Recommended:
• formatted FAT32
• 1-8 GB
• USB 2.0 compliant
• no other les
Insert USB drive into computer
USB slot.
In the USB drive root folder,
create new folder called
EVOLUTION.
Within that folder, create new
folder called FIRMWARE.
Download the firmware files
Browse to Toro’s EVOLUTION page:
USA and Canada: www.toro.com/evolution
Int’l: www.toroevolution.com
Click on the Firmware tab.
(US website shown.)
Click the EVOLUTION rmware V3.50 link.
e le will be downloaded to your computer’s
Downloads folder (for Windows).
Extract and copy the files to the USB drive
Find the downloaded ZIP le.
Double-click it to open the
compressed le.
You will see three les.
Select all three les and COPY
them.
Navigate to the FIRMWARE
folder on the USB drive.
PASTE the les into that folder.
EJECT and remove the USB
thumb drive.
1
1
1
2
2
2
3
3
3
4
B
C
At the Computer
A
e EVOLUTION controller can be updated by downloading the latest controller rmware from Toro’s website, loading
the rmware onto a USB drive, and inserting it into the controller’s USB port. ere are two dierent methods to load the
rmware depending on the version currently running on your EVOLUTION controller. So, to begin, you will need to conrm
the rmware version currently loaded onto your EVOLUTION Series Controller. Press the ADVANCED button, scroll down
and select FIRMWARE, and select VERSION.
For rmware version 3.10 and later, refer to section Updating from Version 3.10 and Later.
For rmware versions prior to 3.10, refer to section Updating from Version 2.13 and Earlier.
To take advantage of the latest updates to the EVOLUTION Smart Connect® add-on, your EVOLUTION controller
needs to be updated to at least version 3.10.
To take advantage of the latest updates and capabilities of the SMRT Logic™ Internet Gateway and accompanying
SMRTscape app and website, your EVOLUTION controller needs to be updated to at least version 3.50.