User manual

skin.Wherethisisthecaseusesuitableprotectivegloves.
Attention! Non-observance of these instructionsputs property at risk
ofdamage.
Do not connect any damaged device (e.g. transport damage) and
unplug the mains adapter from the mains socket immediately in the
caseof damage. Arrange for thedamage to be repaired immediatelyby
aspecialist.
Protect the product against strong magnetic or electrical fields and
againststrongmechanicalloadsandvibrations!
Useonlytherecommendedbatterytypes.
Useonlynewbatteriesanddonotmixbatteries.
Removeoldorusedbatteriesfromthedevice.
If the unit is to be unused for a longer period disconnect the mains
adapterfromthemainssupplyandremovethebatteries.
Prise open the battery compartment cover [19] fromthe lower edge of
theremotecontrol[14].
Place the supplied CR 2032 battery [20] in the battery compartment
[21]sothatthe"+"symbolisvisible.
Replacethebatterycompartmentlidontotheremotecontrol.
If required, batteries can be installed in the main unit in order to keep
the unit operational should the mains adapter power supply be
interupted.
Removethethreescrews[12]withasuitablescrewdriver.
Removethebatterycompartmentcover[13]fromthemainunit.
Place 8x suitable AA batteries in the battery compartment, paying
attentiontothepolarity(seeFig.B).
Replacethebatterycompartmentcover.
Plug the DC-plug of the mains adapter [25] into the mains adapter
connection[11]ofthemainunit.
Connectthemainsadaptertoasuitablemainspoweroutlet.
The microwave sensor detects mainly towards the rear side of the main unit
(seeFig.C,I).Itdetectsmovementofobjects(people,cars,animalsetc.).
The sensor can detect movement through objects or walls of wood, plastic,
concreteand brick, the detection range is reducedby half (dependant on the
material-seeFig.C.,II).
The sensor cannot detect through metal objects, objects containing
metalorthickobjects(seeFig.D).
Avoid metal doors, cupboards and similar objects in the detection area
(seeFig.D,IandIII).
Ensure that there are no heat sources within the detection area, these
cancausefalsetriggering.
Place the main unit inside the property with the back side towards the
wallon the otherside of which the movement is to be detected, eg. next
tothefrontdoororpatiodoor.
Place the main unit, if possible on a table or shelf directly against the
wall(seeFig.D,IIandIV).
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
#
#
#
#
#
7. Commissioning
8. Location
Sensor type: microwave
Detection range: max. 7 m (in free space)
Wireless receiver: 433.92 MHz
Speaker power: ax. 5 W
Siren duration: max. 20 sec.
Operating temperature: 0 °C to +40 °C
Application: indoor use only
Housing material: ABS
Dimensions: approx. 158 x 173 x 116 mm
Operating voltage: 3 V DC
Power consumption: max. 5 mA
Power supply: 1x CR 2032 battery
Transmission frequency: 433.92 MHz
Transmitting range: max. 20 m (in free space)
Coding: preset into the main unit
Indicator: LED
Operating temperature: 0 °C to +40 °C
Housing material: ABS
Dimensions: approx. 38 x 69x7mm
Power supply: 100-240 V , 50/60 Hz
Power consumption: 6 W
Power output: 12 V DC, max. 500 mA
Life and health are endangered if the following instructions
arenotobserved.
Operate the alarm unit with 12 V DC only! Use a mains socket close to
the device and ensure that you can access the socket easily. The mains
supply must be 230 V, 50 Hz, fitted with a suitable fuse or cut-out
deviceandcomplywiththe applicableregulations. Otherwise thereisa
risktolifeandlimb!
Do not leave small children unsupervised withthe appliance, batteries,
packing material or small parts. Otherwise there is a risk of fatal injury
duetochoking.
Make sure that the alarm sound is not triggered when someone is inits
directvicinityOtherwisethereisariskofseverehearingdamage!
Donotdamageanycablesorpipes forgas,electricity, waterortelecoms
whenyouaredrillingormountingthedevice!Otherwisethereisariskto
lifeandlimb!
Handle the mains adapter cable carefully! Place all cables in such a
position that they cannot be damaged or become a trip hazard.
Otherwisethereisarisktolifeandlimb!
Do not allow the device to come into contact with moisture! Otherwise
thereisarisktolifeandlimb!
Makesure that the batteries arenotshort-circuited,northrowninto fire.
They must also not be recharged or opened. There is a danger of fatal
injuryduetoexplosion.
Remote control EW01R
Mains adapter
Danger!
6. Safetyinstructions
!
!
!
!
!
!
!
!
Leaking or damagedbatteries can cause burning upon contact with the
GB-19