A321 MASSAGE CHAIR OPERATION INSTRUCTIONS SAVE THESE INSTRUCTIONS
Thank you for purchasing this product. Before you use it, please read the Operation Instructions in detail for the correct usage of this product, especially the important safety warnings. Keep the Operation Instructions properly for future reference. Note: iRest reserves the right to change and explain any product design without prior notice. Product colors are subject to the actual products.
Safety and Maintenance Safety and Maintenance 1.Important Safety Warnings ·Do not allow children to touch any movable part of this product. ·Use the well-grounded power supply unit suitable for this product. ·Pull out the plug after use or before cleaning to avoid any physical injury or damage to the product. ·Operate this product as instructed in this manual. ·Do not use any parts or accessories which are not recommended. ·Do not use this product outdoors.
Safety Warning Safety Warning Warning Warning When the legrest of the massage chair is lifted, nobody should apply pressure on the legrest to prevent the massage chair from falling forward which will damage this product or result in personal injuries. Do not remove or pull out the remote controller cable or the power cord in the standby or power-on state to avoid any damage to this product or accidental electric shock of a body part.
Name of Components Function 1 2 3 4 5 ·This product is designed with a set of massage chair manipulators that can move up and down, drive four wheels and operate in mute mode. ·There are five simulative massage techniques: Shiatsu, Kneading, Tapping, Knocking , and simultaneous kneading and Tapping. ·This product is equipped with automatic shoulder detection and positioning.
Method of Usage Method of Usage Note: Specific display is subject to the actual product! 1.LCD: ·Display all massage functions. 2.Power switch: ·Turn on or off all massage functions. 3.Heat key: ·Turn on/off the heating massage function. 4.Timing key: 1 ·Timing adjustment. 5.Automatic lying key: ·There are three automatic lying modes, which can automatically switch according to your own needs. 6.Legrest up key: ·Adjust the legrest up function. 7.
Method of Usage Method of Usage 1.Turn on the power supply of this product ·Automatic massage Function FUSE: T5AL 250V Power-on diagram CONTROLLER JACK ON/OFF Button Description Display Comfort Comfort: The most comfortable massage experience. F1 Auto Relax: Gentle and comfortable deep massage to relieve your body fatigue and relax the body. F2 Auto Stretch: Move your body parts up and down through the legrest and the backrest; airbag massage can be performed; and your legs can be.
Method of Usage Method of Usage ·Manual massage for the upper body ·Heat massage Function Button Massage ball adjustment Display Shiatsu: speed, width Function Description Button Display Press this button to turn on or off the Carbon fiber heating treatment on the back and legs. After it is started, heating can be performed within three minutes.
Method of Usage Method of Usage 3.Introduction to Armrest Shortcut Keys Function Description Power button: Short press this button to turn ON/OFF the massage. Linkage lying knob: By rotating this knob clockwise, the backrest will move downward slowly and the legrest will rise slowly; by releasing it, such DOWN/UP action of the backrest and the legrest will be stopped.
Method of Usage Method of Usage 4.Voice Control Mode ·When the massage chair is turned on or in standby mode, the sound "Hi Alice" or "Hey Alice"will be produced to enable the voice control function. Alternatively, you can press the voice control button on the armrest to enable the voice control function. ·Long press 3 seconds to turn on or off the voice control function. ·After such function is enabled successfully, the massage chair will reply "I am here.
Method of Usage Method of Usage 8.Installation Instructions for Legrest 9. Instructions for Removal and Use of Head Cushion and Backrest ·The use of the head cushion can reduce the intensity of kneading massage on the neck and shoulders. You can decide whether to use the head cushion according to your own needs (the head cushion is recommended). The backrest and the back cushion are connected by a zipper (1). The head cushion and the backrest are connected by a zipper (2).
Method of Usage 11.Instruction for Movement ·Make sure that all the wires are pulled away from the massage chair surface; then press the backrest down to a certain angle (with the center of gravity resting on the wheels), you can push the massage chair forward with hands, move it to a suitable position and gently restore it to the normal angle. (Note: During movement, you must turn off the power button first and then unplug the power cord and the remote controller connection wire.
