Pre-Assemblies and Pre-Fab Components Effective November 2005 United States Tel: 901.252.8000 Fax: 901.252.1354 Canada Tel: 450.347.5318 Fax: 450.347.1976 Technical Services Tel: 888.862.3289 www.tnb.
Save on Labor Costs... Let Steel City® Do the Pre-Assembly Work for You! Pre-Assemblies Faster Installation for Increased Profit Margin! Paying to assemble outlet boxes, grounding pigtails, device covers, and mounting brackets on the job site can quickly become an expensive proposition. Instead, choose Steel City Pre-Assemblies and realize significant labor savings.
Pre-Assemblies Box with Pre-Installed 101⁄2" Pigtail • Popular 4" square boxes and switch boxes • Pre-installed 101⁄2" insulated grounding pigtails • Save on labor costs by eliminating multiple installation steps 521711234EP Pre-Assembled Installation vs. 1 Install box in desired location — DONE! Standard Installation 1 Purchase pre-stripped pigtail 2 Install pigtail and ground screw in box 3 Install box in desired location Box with Pre-Installed 101⁄2" Pigtail Cat.
Pre-Assemblies Box with Pre-Installed 101⁄2" Pigtail and Box Support Cover • 4" square welded box, 11⁄2" or 21⁄8" deep • Pre-installed 101⁄2" insulated grounding pigtail • Box support cover combines box-to-stud mounting bracket with device cover 52171-CM14-5/8 • One- or two-device box support cover, raised 1⁄2", 5 ⁄8", or 3⁄4" • Save on labor costs by eliminating multiple installation steps 52171-CM14-5/8 mounted to stud Pre-Assembled Installation vs.
Pre-Assemblies Box with Pre-Installed 101⁄2" Pigtail, Raised Cover, and Box-to-Stud Bracket • 4" square welded box, 11⁄2" or 21⁄8" deep • Pre-installed 101⁄2" insulated grounding pigtail SSF-SH2346 • One- or two-device cover, raised 1⁄2", 5⁄8", or 3⁄4" • SSF-SH2346 box-to-stud mounting bracket • Save on labor costs by eliminating multiple installation steps 171-SH2346-1458 Pre-Assembled Installation 1 Mount assembly to stud — DONE! vs.
Pre-Assemblies Box with Pre-Installed 101⁄2" Pigtail, Raised Cover, and Vertical Mounting Bracket • 4" square welded box, 11⁄2" or 21⁄8" deep • Pre-installed 101⁄2" insulated grounding pigtail • One- or two-device cover, raised 1⁄2", 5⁄8", or 3⁄4" 151-SV12-1458 • 12" (SSF-SV12) or 18" (SSF-SV18) vertical mounting bracket • Save on labor costs by eliminating multiple installation steps 151-SV18-1458 Pre-Assembled Installation vs.
6
7
8
9
10
11
12
13
Increase Your Profit Margin by Reducing Installation Time on the Jobsite! Pre-Fab Components Easily Pre-Assembled Off-Site for Faster Installation On-Site! Rather than assembling box mounting brackets and device covers on-site, keep an eye on profit and use Steel City Pre-Fab Components to set up jobs off-site for a quick and easy installation on-site. They accommodate a wide variety of Steel City covers, and they’re readily available for fast-track projects.
Pre-Fab Components Box with Pre-Installed 101⁄2" Pigtail • Popular 4" square boxes and switch boxes • Pre-installed 101⁄2" insulated grounding pigtails • Save on labor costs by eliminating multiple installation steps 521711234EP Pre-Assembled Installation vs. 1 Install box in desired location — DONE! Standard Installation 1 Purchase pre-stripped pigtail 2 Install pigtail and ground screw in box 3 Install box in desired location Box with Pre-Installed 101⁄2" Pigtail Cat.
Pre-Fab Components SBO16 and SBO24 Stud-to-Stud Horizontal Mounting Brackets SBO16 • Constructed of 24-gauge steel • Pre-measured on center for 16" (SBO16) or 24" (SBO24) stud spacing • SBO16 accepts three 4" square or two 411⁄16" boxes (deep or shallow) SBO16 mounted to 16" studs with three 4" square boxes (full capacity) installed SBO16 mounted to 16" studs with one 4" square box installed • SBO24 accepts five 4" square or four 411⁄16"" boxes (deep or shallow) • Can be mounted at any height to meet
Pre-Fab Components SV1218 Floor-Track 12" and 18" Vertical Mounting Bracket SV1218 SVX • Code-standard SV1218 bracket mounts to floor track easily with screws through three pre-punched holes in bottom plate (only two screws required for most applications) • Offers pre-measured box-mount locations at 12" and 18" from floor — fast installation with no measuring required SVX with box installed • Accepts 4" square or 411⁄16" boxes (deep or shallow) with standard device covers (mud rings) • Supplied with h
Pre-Fab Components Box Support Covers • Combines a box-to-stud mounting bracket with a device cover in one easy-to-use product 52CM14-5/8 • Designed for use with 4" square boxes • Used with both steel and wood studs • Cover raised 1⁄2", 5⁄8", or 3⁄4" 52CM14-5/8 • Designed for one or two devices SSF-SH2346 SSF-SG16A Box-to-Stud Mounting Brackets • Attaches 4" or 411⁄16" electrical box to metal stud Adjustable Box Brackets • Designed for metal studs 16" or 24" on center • Can also be adjusted for non-
For U.S. Customer Service and Order Inquiries, call 1-800-816-7809 or fax 1-800-816-7810. For International Service and Order Inquiries, call (U.S.) 901-252-5400 or fax 901-252-1330. For Canadian Customer Service and Order Inquiries, call 450-347-5318 or fax 450-347-1976. For U.S. Technical Support, call 1-888-862-3289 or fax 901-252-1321. For International Technical Support, call (U.S.) 901-252-5000, enter 1, 6672. For Tool Service and Repair, call 1-800-284-TOOL (8665).
