E-commerce Division - Enitial Lab FGI-18706C21 (Not Included) Page 1 of 18 18-09-13
Page 2 of 18
Page 3 of 18
Page 4 of 18
Page 5 of 18
Shoe Cabinet MODEL #FGI-18706C21 Page 6 of 18
Get Ready Please group boards as below Page 7 of 18
Attach stopper (#15) to panel (#A). Add a dab of glue (#19) into the dowel holes of panels before inserting dowels (#3). Align magnet (#18) to panel (#I), then secure by using screws (#9).
Spring assisted door pin (#13). Fixed door pin (#14). Align hinge (#11) just as the image shows, then secure by using screws (#6).
Refer to page 5 on how to secure cam locks (#2) to cam bolts (#1).
Page 11 of 18
The distance between the hole on back panel (#M) to the unit is longer then the distance between the hole to the back panel ends.
Page 13 of 18
Insert shelf pins (#27) to the desired height of the shelves (#F,G).
Insert fixed door pin (#14) into unit first before spring assisted pin (#13).
This screws adjusts length. This screw adjusts depth.
Align fixative plates (#8) around the grooves of the back panels, then secure by using screws (#9).
Page 18 of 18
