E-commerce Division - Enitial Lab FGI-1887C25 (Not Included) Page 1 of 17 18-08-06
Page 2 of 17
Page 3 of 17
Page 4 of 17
Page 5 of 17
TV STAND MODEL #FGI-1887C25 Page 6 of 17
Get Ready Please group boards as below Page 7 of 17
Apply a dab of glue into dowel holes of panels before inserting dowels (#3). Refer to page 5 on how to secure cam locks (#2) onto cam bolts (#1).
Spring assisted pin. Fixed pin.
Page 10 of 17
Page 11 of 17
Page 12 of 17
Page 13 of 17
Page 14 of 17
Extend and align the small hole of the drawer rail to the hole of the drawer, then secure by using bolts (#5).
Insert the fixed pin (#6) into the hole of the unit first, then the spring assisted pin (#7).
Insert the fixative plates (#10) around the grooves of the back panels (#Q), then secure by using screws (#9).
