Data Sheet

Seite 30 von 44
Copyright LZE GmbH 2021
Additional Features
Eine gemeinsame Initiative von
The following table gives an overview about the content of different address ranges in the EEPROM.
Address
range
Content
Note
0x001 –
0x00F
SPI register initialization
At the reset cycle the content of this EEPROM
address range is copied to the SPI accessible
volatile memory and will be used during normal
operation.
0x010 –
0x01F
Sensor calibration data
Do not access this address range. Any modification
will result in device malfunction!
0x020
Lock mode
Definition of EEPROM access restrictions. Refer to
7.3 for further information.
0x021 –
0x026
Reserved
Do not access this address range. Any modification
will result in device malfunction!
0x027
Analog calibration data
Write access to this address is prevented.
0x028 –
0x02D
Reserved
Do not access this address range. Any modification
will result in device malfunction!
0x02E –
0x02F
Unique ID
Every device of a production lot has a unique 32-bit
identification number. It can be used for traceability
purposes. The production lot can be identified by the
date code on every device.
Write access to the ID is prevented.
0x030 –
0x057
Analog and sensor
calibration data
Do not access this address range. Any modification
will result in device malfunction!
0x058 –
0x05E
Reserved
Do not access this address range.
0x05F –
0x07F
Angle linearization table
Refer to 7.8 for further information.
0x080 –
0x0FF
Sensitivity correction
tables
Do not access this address range. Any modification
will result in device malfunction!
0x100 –
0x1FF
Measurement sequence
definitions
Do not access this address range. Any modification
will result in device malfunction!
EEPROM address
ranges