Use and Care Manual

RyderRack Care and Use Manual
High Speed Welding LLC d.b.a RyderRacks (“RyderRacks”) extends a lifetime
limited warranty to its customers. We aim to achieve the highest standard of
customer service for any warranty and/or standard return. Our warranty and
return policy is based on a Defective/Malfunctioning Product. Proper care and use
as outlined by RyderRacks MUST be followed for warranty to remain valid.
RyderRack Care and Use
1. Once per month, or weekly if your RyderRack is subject to frequent use
and/or heavy loading, inspect all welds and check mounting locations to
ensure there has been no degradation of material, cracking in welds, or
loosening of fasteners.
2. On a bi-annual basis, wash your RyderRack with warm, soapy water using a
product like Dawn to remove oils or waxes that may have built up by regular
use. After washing your RyderRack, coat it with a marine grade wax like
Woody Wax using their instructions. Woody Wax is specially formulated to
clean and protect the marine grade anodized aluminum that your RyderRack
is constructed of. (http://www.woody-wax.com/)
Load weight should not surpass more than one-third of your vehicle’s total payload
capacity. Loads should not overhang on either end of a RyderRack by more than 18
inches. If a RyderRack is damaged because of misuse, negligence, abuse, accident,
improper installation then the warranty will be deemed null and void. RyderRacks
load test is based on a racks ability to hold loads when not secured to a vehicle in a
static lab environment. RyderRacks will not warranty for load capacities nor will
the Company be responsible to bed damage caused by your load. The company has
no way of determining whether the product was properly installed and used
correctly or if a load was correctly secured.
High Speed Welding, LLC dba RyderRacks
6820 B3 Market St.
Wilmington, NC 28405 USA
[e-mail]
910.557.2258
www.RyderRacks.com