User manual

64
www
www
.foscam.co
.foscam.co
m
m
Shenzhen
Shenzhen
Foscam
Fosca
m
Intelligent
Intelligent
Technology
Technolog
y
Co.,
Co.,
Limited
Limited
Tel:
Tel:
86
86
755
755
2674
2674
5668
5668
Fax:
Fax:
86
86
755
755
2674
2674
5168
5168
64
4.8 Firewall
This section explains how to control the access permission by checking the client PC’s IP
addresses. It is composed of the following columns: Block access from these IP addresses
and Only allow access from these IP addresses.
Figure 4.50
Enable firewall, If you select Only allow access from these IP addresses and fill in 8 IP addresses
at most, only those clients whose IP addresses listed in the Only allow access from these IP
addresses can access the Network Camera. If you select Block access from these IP
addresses, only those clients whose IP addresses are in the IP list cannot access the Network
Camera.
Click Save to take effect.
4.9 System
In this panel, you can back up/restore your camera settings, upgrade the firmware to the latest
version, restore the camera to default settings and reboot the device.
4.9.1 Back up& Restore settings
Click Backup to save all the parameters you have set. These parameters will be stored in a bin
file for future use.