Product Literature

SPECIFICATIONS | INF35/INF55 | FLX35/FLX55
FLX35/FLX55 SPECIFYING INFORMATION
INF35/INF55 SPECIFYING INFORMATION
* All sprinklers are equipped with the selectable pilot valve that allows settings at 50, 65, 80 and 100 psi.
Note: Not all models available.
INFX5-XXX-XX
Body Inlet Arc Nozzle Pressure Regulation* Activation Type Optional
INFX 5 XX X X X
3 - 25 mm (1")
5 - 40 mm (1.5")
5-Part circle and
Full circle in One
INF35 - 30, 31, 32, 33, 34, 35 ,36, 37
INF55 - 51, 52, 53, 54, 55, 56, 57,
58, 59
6 - 65 psi (4,5 bar)
8 - 80 psi (5,5 bar)
1 - 100 psi (6,9 bar)
1 - Standard Solenoid
2 - Spike Guard™ Solenoid
3 - Nickel-plated Spike Guard Solenoid
4 - DC Latching Solenoid (DCLS)
5 - Integrated GDC Module w/DCLS
6- Integrated LYNX Smart Module w/DCLS
7 - Euent
Example: When specifying an INF35 Series Sprinkler with #34 nozzle, pressure regulation at 65 psi and Spike Guard™ you would specify: INF35-346-2
* All sprinklers are equipped with the selectable pilot valve that allows settings at 3,4; 4,5; 5,5; and 6,9 Bar (50, 65, 80 and 100 psi).
Note: Not all models available. Nickel-plated, corrosion-resistant models are available upon request.
FLXX5-XXX-X
Body Inlet Arc Nozzle Pressure Regulation* Activation Type
FLXX 5 XX X X
3 - 25 mm (1")
5 - 40 mm (1.5")
5-Part circle and
Full circle in One
FLX35 - 30, 31, 32, 33, 34, 35 ,36, 37
FLX55 - 51, 52, 53, 54, 55, 56, 57,
58, 59
6 - 65 psi (4,5 bar)
8 - 80 psi (5,5 bar)
1 - 100 psi (6,9 bar)
1 - Standard Solenoid
2 - Spike Guard™ Solenoid
3 - Nickel-plated Spike Guard Solenoid
4 - DC Latching Solenoid (DCLS)
5 - Integrated GDC Module w/DCLS
6- Integrated LYNX Smart Module w/DCLS
Example: When specifying an FLX35 Series Sprinkler with #34 nozzle, pressure regulation at 65 psi and Spike Guard™ you would specify:
FLX35-346-2
FEATURES
• Dual Trajectory adjustment on main nozzle -
25° or 15°
• Part/Full circle sprinklers
• Radius reduction screw 363-4839 for fine
tuning
• Ratcheting riser
• Nozzle base clutching
• Pop-up height to nozzle: 8,25 cm (3.25”)
OPERATING SPECIFICATIONS
Inlet:
• INF/FLX35-: 25 mm (1”) ACME
• INF/FLX55: 40 mm (1.5”) ACME
Radius:
• INF/FLX35: 13,1 – 25,3 m (43’ – 83’)
• INF/FLX55: 16,7 – 28,0 m (55’ – 92’)
Flow Rate:
• INF/FLX35: 31,0-179,0 LPM
(8.2 – 47.8 GPM)
• INF/FLX55: 53,0-232,0 LPM
(14.1 – 61.3 GPM)
Precipitation Rates:
• INF/FLX35:
Minimum: 10,4 mm/hr (0.41”/hr);
Maximum: 11,4 mm/hr (0.45”/hr)
• INF/FLX55:
Minimum: 11,7 mm/hr (0.46”/hr);
Maximum: 14,7 mm/hr (0.58”/hr)
Pilot Valve:
Selectable at 3,4; 4,5; 5,5; and 6,9 Bar
(50, 65, 80 and 100 psi)
Recommended Operating Pressure Range:
• 4,5-6,9 Bar (65-100 psi)
• Maximum: 10,3 Bar (150 psi)
• Minimum: 2,8 Bar (40 psi)
Activation type
- Standard Solenoid:
• 24 VAC, 50/60 Hz
• Inrush: 0.30 A
• Holding 0.20 A
- Spike Guard Solenoid:
• 24 VAC, 50/60 Hz
• Inrush: 0.12 A
• Holding 0.10 A
- Nickel-Plated Spike Guard Solenoid:
• 24 VAC, 50/60 Hz
• Inrush: 0.12 A
• Holding 0.10 A
- DC Latching Solenoid (DCLS)
• Momentary low voltage pulse
- Lynx Smart Module with DCLS
• Momentary low voltage pulse
NOZZLE SELECTION
• INF/FLX35 has eight nozzle variations
(30, 31, 32, 33, 34, 35, 36 & 37)
• INF/FLX55 has nine nozzle variations
(51, 52, 53, 54, 55, 56, 57, 58 & 59)
• Three in-line nozzles, rotating stream pattern
• Two back nozzle position
• Stator varations INF35/INF55 - 3
DIMENSIONS
INF: Smart Access® Cover and Compartment
Diameter / FLX: Body Diameter
• INF35: 19 cm (7.5”) /
FLX35: 16,5 cm (6.5”)
• INF55: 19 cm (7.5”) /
FLX55: 19 cm (7.5”)
• Body height:
• INF/FLX35: 25 cm (10”)
• INF/FLX55: 29 cm (11.38”)
• Weight:
• INF35: 1,93 kg (4.26 lbs.) /
FLX35: 1,31 kg (2.89 lbs.)
• INF55: 2,30 kg (5.08 lbs.) /
FLX55: 1,62 kg (3.57 lbs.)
• Weight: (FLX35/FLX55 with integrated GDC)
• FLX35: 1,62 kg (3.57 lbs.)
• FLX55: 1,93 kg (4.26 lbs.)
• Weight integrated with Lynx Smart Module:
• INF35: 2,24kg (4.95 lbs.)
• FLX35: 1,62kg (3.58 lbs.)
• INF55: 2.59kg (5.71 lbs.)
• FLX55: 1,93kg (4.26 lbs.)
WARRANTY
• Two years; Five years when installed with
Toro® Swing Joints