Product Literature
SPECIFICATIONS | INF34/INF54 | FLX34/FLX54
FLX34/FLX54 SPECIFYING INFORMATION
INF34/INF54 SPECIFYING INFORMATION
* All sprinklers are equipped with the selectable pilot valve that allows settings at 50, 65, 80 and 100 psi.
Note: Not all models available.
INFX4-XXX-XX
Body Inlet Arc Nozzle Pressure Regulation* Activation Type
INFX 4 XX X X
3 - 25 mm (1")
5 - 40 mm (1.5")
4-Full Circle INF34 - 31, 32, 33, 34, 35 ,36, 37
INF54 - 51, 52, 53, 54, 55, 56, 57,
58, 59
6 - 65 psi (4,5 bar)
8 - 80 psi (5,5 bar)
1 - 100 psi (6,9 bar)
1 - Standard Solenoid
2 - Spike Guard™ Solenoid
3 - Nickel-plated Spike Guard Solenoid
4 - DC Latching Solenoid (DCLS)
5 - Integrated GDC Module w/DCLS
6- Integrated LYNX Smart Module w/DCLS
Example: When specifying an INF34 Series Sprinkler with #34 nozzle, pressure regulation at 65 psi and Spike Guard™ you would specify: INF34-346-2
* Electric models only. All sprinklers are equipped with the selectable pilot valve that allows settings at 3,4; 4,5; 5,5; and 6,9 Bar (50, 65, 80 and 100 psi).
Note: Not all models available. Nickel-plated, corrosion-resistant models are available upon request.
FLXX4-XXX-X
Body Inlet Arc Nozzle Pressure Regulation* Activation Type
FLXX 4 XX X X
3 - 25 mm (1")
5 - 40 mm (1.5")
4-Full Circle FLX34 - 31, 32, 33, 34, 35 ,36, 37
FLX54 - 51, 52, 53, 54, 55, 56, 57,
58, 59
6 - 65 psi (4,5 bar)
8 - 80 psi (5,5 bar)
1 - 100 psi (6,9 bar)
1 - Standard Solenoid
2 - Spike Guard™ Solenoid
3 - Nickel-plated Spike Guard Solenoid
4 - DC Latching Solenoid (DCLS)
5 - Integrated GDC Module w/DCLS
6- Integrated LYNX Smart Module w/DCLS
Example: When specifying an FLX35 Series Sprinkler with #34 nozzle, pressure regulation at 65 psi and Spike Guard™ Solenoid you would specify: FLX34-346-2
FEATURES
• Dual Trajectory adjustment on main nozzle -
25° or 15°
• Constant velocity full circle drive
• Radius reduction screw can eectively reduce
the sprinkler throw down to 9 meters
• Pop-up height to nozzle: 8,25 cm (3.25”)
OPERATING SPECIFICATIONS
Inlet:
• INF/FLX34: 25 mm (1”) ACME
• INF/FLX54: 40 mm (1.5”) ACME
Radius:
• INF/FLX34: 15,9/15,8 – 27,8 m (52’ – 91’)
• INF/FLX54: 15,9/15,8 – 30,2 m (52’ – 99’)
Flow Rate:
• INF/FLX34: 49,2/48,8-177,5 LPM
(13.0 – 46.9 GPM)
• INF/FLX54: 50,0-233,9 LPM
(13.2 – 61.8 GPM)
Precipitation Rates:
• INF/FLX34:
Minimum: 8,4 mm/hr (0.33”/hr);
Maximum: 13,9/14,0 mm/hr (0.55”/hr)
• INF/FLX54:
Minimum: 8,4 mm/hr (0.33”/hr);
Maximum: 15,5 mm/hr (0.61”/hr)
Pilot Valve:
Selectable at 3,4; 4,5; 5,5; and 6,9 Bar
(50, 65, 80 and 100 psi)
Recommended Operating Pressure Range:
• 4,5-6,9 Bar (65-100 psi)
• Maximum: 10,3 Bar (150 psi)
• Minimum: 2,8 Bar (40 psi)
Activation type
- Standard Solenoid:
• 24 VAC, 50/60 Hz
• Inrush: 0.30 A
• Holding 0.20 A
- Spike Guard Solenoid:
• 24 VAC, 50/60 Hz
• Inrush: 0.12 A
• Holding 0.10 A
- Nickel-Plated Spike Guard Solenoid:
• 24 VAC, 50/60 Hz
• Inrush: 0.12 A
• Holding 0.10 A
- DC Latching Solenoid (DCLS)
• Momentary low voltage pulse
- Lynx Smart Module with DCLS
• Momentary low voltage pulse
NOZZLE SELECTION
• FLX34 has seven nozzle variations
(31, 32, 33, 34, 35, 36 & 37)
• FLX54 has nine nozzle variations
(51, 52, 53, 54, 55, 56, 57, 58 & 59)
• Three opposing nozzles, rotating stream
pattern
• Two additional front nozzle positions
DIMENSIONS
INF: Smart Access® Cover and Compartment
Diameter / FLX: Body Diameter
• INF34: 19 cm (7.5”) /
FLX34: 16,5 cm (6.5”)
• INF54: 19 cm (7.5”) /
FLX54: 19,1 cm (7.5”)
• Body height:
• INF34: 25 cm (10”) /
FLX34: 25,4 cm (10")
• INF54: 29 cm (11.38”) /
FLX54: 28,9 cm (11.375")
• Weight:
• INF34: 1,91 kg (4.22 lbs.) /
FLX34: 1,35 kg (2.98 lbs.)
• INF54: 2,28 kg (5.04 lbs.) /
FLX54: 1,68 kg (3.70 lbs.)
• Weight integrated with Lynx Smart Module:
• INF34: 2,24kg (4.95 lbs.)
• FLX34: 1,61kg (3.65 lbs.)
• INF54: 2,59kg (5.71 lbs.)
• FLX54: 1,92kg (4.24 lbs.)
WARRANTY
• Two years; Five years when installed with
Toro® Swing Joints