Product Literature

SPECIFICATIONS | FLEX800
™
B Series
SPECIFYING INFORMATION
* Electric models only. All sprinklers are equipped with the selectable pilot valve that allows settings at 3,4; 4,5; 5,5; and 6,9 Bar (50, 65, 80 and 100 psi).
Note: Not all models available. Nickel-plated, corrosion-resistant models are available upon request.
FLX3XB-X2-XXXX
Series Arc System Thread Type Valve Type Nozzle
FLX3 X B X 2 XXXX
FLX3 - FLEX800™
B Series
4-Full Circle (DT
only)
5-Part-/Full-Circle
5-6-Part/Full-Circle
with TruJectory
B-Block 0 - NPT
4 - ACME
5 - BSP
Check-O-Matic 3134 - Includes nozzles 31,
32, 33, 34
3538 - Includes nozzles 35,
36, 37, 38
Example: When specifying a FLEX800 B Series Sprinkler with full circle - NPT threads and #34 nozzle, you would specify: FLX34B-02-3134
FEATURES
• Ratcheting riser - Part circle models
• Nozzle base clutching - Part circle models
• Radius reduction screw 363-4839 for fine tun-
ing. Standard on FLX35B; optional on FLX34B
and not available on FLX35-6B models
• Pop-up height to nozzle: 8,25 cm (3.25”)
OPERATING SPECIFICATIONS
Inlet:
• 25 mm (1”) NPT, BSP or ACME
Radius:
• FLX35-6B: 9 m – 29 m (29’ – 95’)
• FLX35B: 9 m - 27 m (29’ – 90’)
• FLX34B:17 m - 29 m (57’ – 95’)
Flow Rate:
• FLX35-6B: 26,8 -198,7 LPM
(7.1 – 52,5 GPM)
• FLX35B: 31,0-213,1 LPM
(8.2 – 56.3 GPM)
• FLX34B: 49,2-209,7 LPM
(13.0 – 55.4 GPM)
Precipitation Rates:
• FLX35-6B: 8,6 - 14,2 mm/hr
(0.34 in/hr - 0.56 in/hr)
• FLX35B: 9,3 - 17,0 mm/hr
(0.37 in/hr - 0.67 in/hr)
• FLX34B: 8,3 - 14,9 mm/hr
(0.33 in/hr - 0.59 in/hr)
Recommended Operating Pressure Range:
• 4,4-6,9 Bar (65-100 psi)
TRAJECTORY
• FLX35-6B - 7° - 30° in 1° increments; 24 positions
• FLX35B - 15° or 25° in 2 positions
• FLX34B - 15° or 25° in 2 positions
CHECK-O-MATIC
feature prevents low head drainage up to 10" of
elevation change
NOZZLE SELECTION
Nozzle Varations
• FLX35-6B - nine variations
(30, 31, 32, 33, 34, 35, 36, 37 & 38)
• FLX35B - nine variations
(30, 31, 32, 33, 34, 35, 36, 37 & 38)
• FLX34B - eight variations (31, 32, 33, 34, 35,
36, 37 & 38)
• Back nozzle capability on part circle models
standard
• FLX35-6B - one position available
• FLX35B - two positions available
• FLX34B - two additional front nozzle
positions
• Main-less capability for short radius
applications
Stator variations:
• FLX35-6B, FLX35B: 3
• FLX34B: 2
DIMENSIONS
• Body Diameter: 15,2 cm (6")
• Body height: 21,6 cm (8,5")
• Weight:
FLX35-6B: 0,9 kg (1.99 lbs)
FLX35B: 0,9 kg (1.99 lbs)
FLX34B: 0,89 kg (1.97 lbs)
WARRANTY
• Two years; Five years when installed with
Toro® Swing Joints