Product Comparison

Saint-Gobain ADFORS
America, Inc.
1795 Baseline Road
Grand Island, NY 14072 - USA
Phone: [phone]
Fax: [phone]
www.adfors.com
ADFORS FibaLath is an innovative fiberglass lath designed
for use in stucco applications and exterior/interior walls of
manufactured stone and brick façades.
FibaLath is a trademark of Saint-Gobain ADFORS America, Inc.
U.S. Patent 7,625,827 and 7,902,092.
FibaLath™, the lightweight alternative FibaLath™, the lightweight alternative
to metal lathto metal lath
For more information, visit FibaLath.com
Frequently Asked QuestionsFrequently Asked Questions
Can FibaLath be used for interior applications?
Yes, FibaLath can be used for interior manufactured stone and brick façade.
What substrate can FibaLath be attached to?
FibaLath can be attached to OSB, plywood or gypsum sheathing per
Intertek CCRR-0249.
What is used to attach FibaLath to a substrate?
Wood framing – 3/4” crown by 1-1/4” 16 gauge staples
Metal framing – #6 x 1-1/4” type S .032” diameter head screws or 1-1/4” x .10”
diameter VersaPIN Gripshank fasters with 1-1/4” Wind-Lock Lath Plates
How much overlap is required during installation?
A minimum of 3” overlap is required for all vertical and horizontal edges as
well as flange and trim accessories.
In which direction does FibaLath need to be installed?
FibaLath can be installed vertically or horizontally.
Can FibaLath be used with open frame construction or soffits?
No, FibaLath must be attached to an approved sheathing substrate.
What is the maximum weight that can be applied to FibaLath?
The maximum allowable weight is 15 lbs per square foot of FibaLath.
How much FibaLath do I need for the job?
A 25’ roll will cover 81 sq. ft. A 55’ roll will cover 180 sq. ft. A 150’ roll will cover
492 sq. ft. Plan for additional material based on job complexity.
Does FibaLath meet the International Building Code (IBC) and
the International Residential Code (IRC)?
Yes, FibaLath is compliant with both of these codes per Inertek CCRR-0249.
FEATURES BENEFITS
Lightweight Easy to transport which results in time/labor and shipping savings
Alkali resistant Long term resilience and performance
Non-metallic Does not rust or rot
Three dimensional Self furring, excellent mechanical key using traditional fastening procedures
Flexible with no sharp edges Easy to handle/install and can be cut with a utility knife or a large pair of regular
scissors
Wide rolls Quicker installation and fewer overlaps
0000 2/20