User Manual

ManualsBrandsUnbranded ManualsAircraftFlymentor Programing Box

KDS FLYMENTOR PPC MANUAL

WWW.KDSMODEL.COM

Summary

KDS flymentor PPC is a device used for adjusting parameters of KDS flymentor. It is

very easy to use.

Connecting Device

Power on the KDS flymentor(make sure the main motor is disconnected), then plug the

link line into the USB slot of the KDS flymentor. The flymentor PPC will power on and the

screen is shown as picture 1.

Picture 1 - Connecting

After few seconds, the flymentor PPC will complete connecting with KDS flymentor, you

can see the main menu on the screen like picture2.

Picture 2 - Connected

The device type of KDS flymentor is shown in title bar, in picture 2, it is '3D'.

Device type

Link line

LOAD/SAVE

DOWN

ESC

Screen

Summary of content (4 pages)

PAGE 1
KDS FLYMENTOR PPC MANUAL Summary KDS flymentor PPC is a device used for adjusting parameters of KDS flymentor. very easy to use. It is Screen UP LOAD/SAVE OK DOWN ESC Link line Connecting Device Power on the KDS flymentor(make sure the main motor is disconnected), then plug the link line into the USB slot of the KDS flymentor. The flymentor PPC will power on and the screen is shown as picture 1.
PAGE 2
KDS FLYMENTOR PPC MANUAL Main Menu There are nine items in main menu , each item contains a set of settings for flymentor. You can move the cursor to the item you want by press UP and DOWN, press OK you can enter the item and modify the settings. See table 1 for details of them. You can also press the LOAD/SAVE button here, then the load/save menu will shown, see chapter load/save for details. Cursor Item no.
PAGE 3
KDS FLYMENTOR PPC MANUAL In this stage, you can select the paramete by pressing UP and DOWN, when the cursor is pointed to the value you want to modify, press OK, then the value will be shown as black background like picture 5. If you want to return back to main menu, press ESC.
PAGE 4
KDS FLYMENTOR PPC MANUAL banks in PPC, choose one by moving cursor with UP and DOWN button, then press OK to confirm your selection. The star character means the blank is already saved something, otherwise it is empty. Of course, you can not load a empty bank. Status notification Empty bank Picture 8 - Memory Bank Select The SAVE function will overwrite the memory bank you selected without any other operation, but the LOAD function has a confirmation before copy, like picture9.