Instructions / Assembly

5 | P a g e
Electrical Work
This fireplace must be grounded
9. A standard electrical outlet must be close to the f ireplace. If the electric outlet is required
to be concealed, it can be located above or on the right hand side of the fire and behind
the glass face.
10. DO NOT INSTALL THE FIREPLACE WHERE THE HEATER IS DI RECTLY
ABOVE AN OUTLET
The fireplace’s vent is located in the center of the fireplace base.
11. If the power supply cable becomes damaged in any manner it MUST be replaced.
12. DO NOT connect the fireplace to an extension cord or cable. This can create an unsafe
condition.
13. The fireplace must not be modified in any way or used for purpose other than those
recommended by Yosemite Home Decor.
14. If the fireplace shows any signs of damage it is important that it is examined by a
qualified professional before use is continued.
15. Please observe these instructions as failure to do so may result in electric shock or other
injury.
16. Always ensure that all electrical work complies with the relevant Building Codes. All
electrical work should be carried out by a qualified electrician.
17. If in any doubt contact your supplier or a qualified electrician.