Use and Care Manual

8 | P a g e
4. Unscrew the socket bracket that holds the light bulb in place.
5. Remove the fan wires that are connected to the heat er. Replace with new fan and wires.
Run wires and fan to the location of where the fan was originally positioned.
6. Put socket bracket for light bulb back on.
8. Place light bulb back in socket. Close bottom cover of the firebox.
9. Once the new fan is in its proper position, screw t he fasteners into their correct location
and fan will be securely stationed.
10. Replace screws to the top cover of the firebox and blower replacement is complete.