Use and Care Manual

9 | P a g e
Replacing Printed Circuit Board (motherboard)
1. Remove screws from the top of the firebox and the upper part of the backside of the
firebox.
(view from the top of the firebox)
2. Once motherboard is visible you will notice nuts securing the motherboard and with
plugs attached to the existing motherboard.
3. Remove the nuts from the existing motherboard ( unit will be loose and only attached by
the plugs)
(top right corner of firebox with cover removed)
4. The plugs will have some play and will be easily transfered over to the new motherboard.
Cutting the ties that hold the plugs together is not necessary.