Instructions / Assembly

OPERATION
This section will explain the function of each convenient control.
NOTE
The heater may emit a slight, harmless odor when first used. This odor is a normal
condition caused by initial heating of internal heater parts and will not occur again.
Control the Electric Fireplace
A. Buttons and indicators
There are five buttons on the remote controller, and five on the control panel of the
fireplace, each pair of buttons with the same label perform the same function:
<POWER> Press the power button,the indicate light, flame light red, yellow, blue
and green 4-color light at the same time, Flame synchronous motor open, the sound
with low voice sounded, Heating function is not turn no, press power button again
then shutdown.
<HEAT> Press the heating key fan to open, After 10 seconds the heating low-
grade, high-grade, turn off button will cycle between the switch, the corresponding
indicator light, when the high-grade indicator light is highlighted, low-grade indicator
light half-light,turn off when heating off, Fan delay 60 seconds off.
<SOUND> Sound adjustment key Each time the sound changes once (low,
medium and high off).