Instructions / Assembly

MAINTENANCE
WARNING
Disconnect power before attempting any maintenance or cleaning to reduce the risk of
fire, electric shock to persons or damage.
Light Bulb Replacement
Light bulbs need to be replaced when you notice a dark section of the flame or
when the clarity and detail of the log exterior disappears. There are two bulbs
under the log set.
WARNING
Allow at least 5 minutes for light bulbs to cool off before touching bulbs to avoid burning
of skin.
I. LED Requirements
Quantity of 1 LED line, rating voltage 120 volts, rating power 3 watts.
CAUTION
Do not exceed 40 watts per bulb
II. Operation
1. Open the light bulb area:
Hold left and right side of the
cover of light bulbs at the bottom
of your firebox and pull straight
out. You can see two bulbs in the
firebox. (Right figure)
2. Examine the bulbs to determine
which bulbs require replacement.
3. Remove old bulb and replace a
new one. Hold the socket while unscrewing
or screwing bulbs. (Right figure)
4. Replace the cover of light bulbs.
5. Done.