Instructions / Assembly
6
4
Attaching the nipple
□ Screw the nipple (EE) about 1/4 in. into the bushing on the
canopy (A).
□ Tighten the hex nut (DD) against the bushing on the canopy (A)
to secure the nipple (EE).
5
Installing light bulbs
□ Install two 60-Watt maximum, medium-base incandescent
bulbs (not included) into the sockets (B).
NOTE: You can use two LED equivalent energy-saving bulbs
that do not exceed 8W each (not included).