Datasheet

GM13a
GM13a
GM13a
GM13a
1. Standard Operating Condition:
标准使用条件
1-1 Rated voltage
额定电压
6.0V DC
1-2 Operating voltage range
使用电压范围
4.0V ~ 7.0 V DC
1-3 Rated load
额定负载
200 g-cm by pulley load
（力矩盘负载 200 g-cm ）
1- 4 Direction of rotation
旋转方向
CW&CCW viewed from protruded shaft side
从轴伸端看为顺时针或逆时针方向
1- 5 Motor position
电机姿势
All direction of protruded shaft
出力轴所有方向
1- 6 Operating temperature range
使用温度范围
- 1 0 ℃ ~+ 6 0 ℃
1- 7 Storage temperature range
贮存温度范围
- 30 ℃ ~+ 85 ℃
2. Measuring Conditions
测试条件
2-1 Motor position
电机姿势
Motor to be held, with shaft horizontally
出力轴水平放置
2-2 Power supply
电源
Regulated power supply which assures unquestionable
可调节直流稳压电源，保证测量时无疑问
2-3 Environmental temperature and
humidity
环境温度和湿度
+10 ℃ ~+35 ℃ and 30%~90%RH.
If judgment is questionable, measurement is be made
Based on JIS Standard Testing Condition( 20 ℃± 2 ℃ ， 65% ± 5% )
温度 +10 ℃ ~+35 ℃ 和湿度 30%~90%RH 条件下测试 ， 如果判断有疑问 ，
则按 JIS 标准测试 ( 20 ℃± 2 ℃ ， 65% ± 5% )
2-4 Direction of rotation
旋转方向
C W viewed from protruded shaft side
从轴伸端看为顺时针方向
3. Electrical Characteristics
电气性能
3-1 No load current
空载电流
Rated voltage, No load
额定电压下，空载
45 mA (max)
3-2 No load speed
空载转速
Rated voltage, No load
额定电压，空载
105 rpm ± 15%
3-3 Rated load current
额定负载电流
Rated Voltage, Rated load
额定电压下，额定负载
105 mA (max)
3- 4 Rated load speed
额定负载转速
Rated voltage, Rated load
额定电压下，额定负载
90 rpm ± 15%
3- 5 Starting current
堵转电流
Rated Voltage, rotor position to be 2/3R
额定电压下，转子位置 2/3R
500 mA (max)
3- 6 Stall torque
堵转力矩
Rated Voltage
额定电压下
1.0k g-cm (min)