Installation Guide

www.cellofoam.com

Cellofoam North America, Inc • 2107 East View Parkway • Conyers, GA 30013 • Phone: 888-772-6383 • FAX: 678-413-3790

UNIVERSAL METAL GARAGE DOOR INSULATION KIT – INSTALLATION GUIDE

Kit Contains: 8 sheets – 1 ¼” x 20” x 54”

Kit will insulate a standard 9 foot garage door. Larger doors require extra kits

Required Tools:

1. Utility Knife

2. Tape Measure

3. Straight Edge

4. Safety Glasses

Step 1: Measure length between the two vertical rails (“A”, “B”) on either side of the garage door.

Step 2: Cut each insulation sheet to length.

PAGE 1
www.cellofoam.com UNIVERSAL METAL GARAGE DOOR INSULATION KIT – INSTALLATION GUIDE Kit Contains: 8 sheets – 1 ¼” x 20” x 54” Kit will insulate a standard 9 foot garage door. Larger doors require extra kits Required Tools: 1. Utility Knife 2. Tape Measure 3. Straight Edge 4. Safety Glasses Step 1: Measure length between the two vertical rails (“A”, “B”) on either side of the garage door. Step 2: Cut each insulation sheet to length.
PAGE 2
www.cellofoam.com Step 3: Snap off the insulation where cut. Step 4: Insert the excess insulation behind the vertical rails Step 5: Insert the insulation sheet between the horizontal rails.