Item #1000-000-000 Model #GFS00323A USE AND CARE GUIDE STEEL GAZEBO Questions, problems, missing parts? Before returning to the store call Customer Service. 8 a.m. - 6 p.m., EST, Monday-Friday 1-888-628-1888 HOMEDEPOT.
Table of Contents Pre-Assembly ............................................................3 Planning Assembly ..............................................................3 Hardware Included ...............................................................3 Package Contents ................................................................4 Assembly ..................................................................5 Care and Cleaning ..................................................14 Table of Contents ....
Pre-Assembly PLANNING ASSEMBLY Read all instructions before assembly. To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard. NOTE: More than one person may be required to complete the assembly for this product. HARDWARE INCLUDED NOTE: Hardware not shown to actual size.
Pre-Assembly (continued) PACKAGE CONTENTS J H G F E I D C K L EE A B FF Part Quantity Description Quantity Part Description A Front panel 4 G Fabric hanger 8 B Side panel 4 H Canopy hub 1 C Left connector bar 4 I Cape 4 D Right connector bar 4 J Decorative ball 5 E Top corner inclined tube 4 K Canopy fabric 1 F Middle top tube 4 L Netting 4 4
Assembly 1 Assembling the panels Connect the front panel (A) with the side panel (B) by lining up the labels near the top, middle, and bottom of the panels and connecting them with M6x50 bolts (DD) and M6 nuts (AA). Repeat for the remaining sets of the panels (A and B). NOTE: Loosely tighten the bolts with the hex wrench (HH) and wrench (II). A B DD AA 5 HOMEDEPOT.COM Please contact 1-888-628-1888 for further assistance.
Assembly (continued) 2 Assembling the connector bars Attach the right connector bar (D) to the left connector bar (C) using M6X12 bolts (BB). Repeat for the remaining sets of the connector bars (C and D). NOTE: Loosely tighten the bolts with the hex wrench (HH).
Assembly (continued) 3 Connecting the panels with the connector bars and cape Connect the panels (A and B) to the connector bars (C and D) with M6x50 bolts (DD) and M6 nuts (AA). When all the panels (A and B) are secure to the connector bars (C and D), connect the cape (I) onto the top corners of the panels (A and B) and the connector bars (C and D) with M6x50 bolts (DD) and M6 Nut (AA). Repeat for the remaining sets of the cape (I).
Assembly (continued) 4 Assembling the canopy Insert the four top corner inclined tubes (E) into the canopy hub (H). Insert the four middle top tubes (F) into the canopy hub (H).
Assembly (continued) 5 Placing the canopy fabric and decorative ball Place the canopy fabric (K) loosely on top of the assembled frame. Screw the decorative ball (J) through the canopy fabric (K) onto the canopy hub (H). NOTE: You may opt to tighten all bolts now before the fabric cover is attached to the frame of the gazebo. K J H 9 HOMEDEPOT.COM Please contact 1-888-628-1888 for further assistance.
Assembly (continued) 6 Attaching the canopy to the top of the panel structure Place the structure assembled in step 5 on top of the assembled panel structure from step 3. Insert the top corner inclined tubes (E) into the four capes (I). Secure the middle top tubes (F) to the right connector bars (D) by using M6x12 bolts (BB). Tighten all bolts.
Assembly (continued) 7 Adding the decorative balls Screw the decorative balls (J) through the canopy fabric (K) and into the capes (I) on each corner. J I J J K 11 HOMEDEPOT.COM Please contact 1-888-628-1888 for further assistance.
Assembly (continued) 8 Attaching the fabric hanger Attach the fabric hanger (G) and the gasket (EE) to the top of the connector bars (C&D) with M6x30 bolts (CC).
Assembly (continued) 9 Hanging the netting Place the plastic rings (FF) onto the fabric hanger (G). Attach the netting (L) to the plastic rings (FF). FF G L L L 13 L HOMEDEPOT.COM Please contact 1-888-628-1888 for further assistance.
Assembly (continued) 10 Grounding the gazebo Pound the ground spikes (GG) through the holes on the flat bars on the bottom of panels (A and B). GG Care and Cleaning For the best results, clean the frame and fabric with a damp cloth and dry thoroughly. This will help prevent mildew by removing dirt particles that may accumulate. Do not clean with abrasive materials, bleach, or solvents. Store the gazebo in a dry, sheltered place when not in use.
Questions, problems, missing parts? Before returning to the store, call Customer Service. 1-888-628-1888 HOMEDEPOT.COM Retain this manual for future use.
