User Manual

All contents copyright 2015, GOLDWING RC Version 2.0, Sep 2015
3.7 Use your radio to set the centers of each servo and then assemble and adjust the length of
each control rod, KUZA 1” aluminium CNC servo arm is recommended for aileron control
(sold separately). The servo arm should be as close to perpendicular to the control rod as
possible while the aileron is at neutral. Double check all screws, bolts and nuts to assure
proper installation and operation without binding.Once satisfied, permanently attach the ball
links to the servo arms and horns with the supplied screw and nut.
3.8 Check the final radio operation of the ailerons and make sure there is no binding or servo
fighting of each other. Also check to make sure all linkage bolts and nuts are secure.