User Manual

All contents copyright 2015, GOLDWING RC Version 2.0, Sep 2015
3.9 Repeat this process for the other wing half.
4 Elevators Assembly
4.1 Find the control horn slots on bottom side the elevators, use the method described in 1.2-
1.4 to install control horns for elevators.
4.2 Elevator horn slot is located on the left side of elevator. Remove covering over the hole for
horizontal stabilizer on fuselage. Removing covering on the central part of horizontal
stabilizer is recommended for better glue bonding. Insert the horizontal stabilizer into
fuselage, make sure it’s centered. Apply thin and gap-filling medium CA to glue it in place.