User Manual

9. Final Assembly and Pre-Flight Inspections

9.1 Before arriving at your flying field, be sure all your batteries are properly charged and all

radio systems are in proper working order.

9.2 Install the wings onto the fuselage being careful to align the wing tube with the wings and

not force it. The wing tube may be initially tight but will loosen some with use. Guide your

servo wires into the fuselage openings and connect to the proper aileron channels. Servo clips

are recommended. Once you have the wings fully seated in the fuselage tighten the wing bolts

inside the fuselage.

9.3 Fixed the SFG Use M3X18 hand bolts and balsa sheets. Installation of the SFG is

optional.