User Manual

9.5 Check all control surfaces for secure hinges by performed a slight tug on the control

surfaces and observing if there is any give in the hinges. Check all control rods, ball links,

servo screws, etc. for proper operation and installation.

9.6 Check your batteries and perform a proper range check once again with the engine off

and running. Be sure all surfaces are moving in the correct direction and the proper amount

for your flying setup.

Recommend Accessories（Not included）：

KUZA Light Alloy servo arms

FUTABA 26mm/1in No. KAG0S76F

HITEC 26mm/1in No. KAG0S76H