Use and Care Manual

ManualsBrandsUnbranded ManualsAir Compressors, Tools & Accessories5 in. Gison Wet Air Polisher GPW-212

GISON Machinery Co., Ltd.

GPW-211 / 212 Wet Air Sander / Polisher

Features

 Lever

Users press or release the lever to start or stop the tools.

 Air Regulator

Users control the speed of the tool by adjusting the shifting knob left or right to

allow the air flow throgugh the air passage according to various needs of profiling.

 Water Hose Valve

Connecting a water hose to the valve to bring waterfedfunction to the tool.



Water Regulator

Water regulator enables users to adjust frequency of water to proper speed according

to various needs of profiling.



Air Inlet Valve

Connecting the tool to air hose with suggested proper air supply.

Summary of content (4 pages)

PAGE 1
GISON Machinery Co., Ltd. GPW-211 / 212 Wet Air Sander / Polisher Features  Lever Users press or release the lever to start or stop the tools.  Air Regulator Users control the speed of the tool by adjusting the shifting knob left or right to allow the air flow throgugh the air passage according to various needs of profiling.  Water Hose Valve Connecting a water hose to the valve to bring waterfedfunction to the tool.
PAGE 2
Pad Installation 43 48 33  Installation： Dovetail the stop spanner（48）to fix the shaft（33）, and turn it in counter clockwise direction to loose the pad（43）.  Replace： Dovetail the stop spanner （ 48 ） to fix the shaft, and turn it in counter clockwise direction to loose the pad（43）. Operation Manual Check the following items prior to operation.  Working Environment Make sure that the work site is in order prior to polishing operations.
PAGE 3
sander to run at excessively high r.p.m. and may cause harm to the operators. operating this sander within the specified air pressure ranges.  Only The Air Regulator Function Grip the body while press the lever. Then switch the air regulator to turn the tool ”on”. For faster r.p.m, turn the air regulator valve for air flow control from zero to max.  Conncetion Of The Air Hose From The Compressor To The Tool Check The air hose connection plug for small stone particles and dust.
PAGE 4
Parts List * :Consuming Part No. 1 2 3 5 6 8 9 10 11 12 13 14 15 16 *17 18 * 19 * 20 21 22 23 * 24 * 25 26 27 29 30 *31 Part No.