User Manual

2
Rev. 7/20
The Greensmaster 1018 is manufactured
in Tomah, WI ISO 9002 Certified Plant.
Greensmaster
®
1018 Specifications
*
* Specifications and design subject to change without notice. Products depicted in
this literature are for demonstration purposes only. Actual products offered for sale
may vary in use, design, required attachments and safety features. Consult your local
Toro Distributor.
GREENSMASTER 1018, MODEL 04820
ENGINE
Honda GX120 - 3.5 hp (2.6 kW) @3600 rpm, gasoline with integral lighting coil.
FUEL CAPACITY
2.1 qts (2L)
FRAME
Fully modular design allows quick disassembly for service / maintenance of all major components.
TRACTION DRIVE
Full gear drive transmission with integral traction differential and traction drive disconnect to ease movement during service / maintenance operations.
Interchangeable drum drive gear cases.
TRACTION DRUM
Dual position traction drum with positions for contour following or forward weight bias at higher heights of cut.
GROUND SPEED
Mowing Speed: 2.0 mph (3.2 km/h) to 3.5 mph (5.6 km/h) Transport Speed: 5.3 mph (8.5 km/h)
CLUTCH
Externally-mounted two sided dry disc clutch actuated by dual motion bail.
BRAKE
Service / parking – band type.
CUTTING UNIT DRIVE
Quick change dual speed gear drive.
CUTTING UNIT ATTACHMENT
Detachable cutting unit allows easy removal for service / maintenance or cutting unit exchange for different uses.
CUTTING UNIT OPTIONS
11-blade cutting unit 14-blade cutting unit
CONTROLS
Engine mounted: recoil starter, choke, fuel shutoff.
Handle mounted: on/off switch, throttle lever, dual motion traction / safety bail, reel engage lever, service/park brake lever, hour meter, light switch (optional).
HANDLE
Loop handle with telescoping adjustment with 5" (12.7 cm) total travel, rubber isolated to minimize operator influence during mowing.
TRANSPORT TIRES / KICKSTAND
Optional – Two, quick-detachable pneumatic tires (3.00X3.25-6). Kickstand is standard.
WIDTH OF CUT
18" (45.7 cm)
HEIGHT OF CUT RANGE
For Greens: (Drum Position One) 0.062" to 0.312" (1.5 mm to 8 mm)
For Tees: (Drum Position Two) 0.25" to 0.625" (6 mm to 16 mm)
High Height of Cut Kit: (Drum Position Two) 1.18" (30 mm)
WEIGHT
210 lbs (95.2 kg) with 11-blade cutting unit, aluminum Wiehle roller.
MAINTENANCE REQUIREMENTS
No daily greasing required.
CERTIFICATION
Designed in accordance to applicable ANSI and CE specifications.
WARRANTY
Two-year limited warranty. Refer to the Operator’s Manual for further details.
BEDKNIFE OPTIONS
117-1530 EdgeMax
TM
Microcut (standard)
110-2300 Extended Microcut
110-2301 Lowcut
117-1532 EdgeMax
TM
Tournament
139-4318 EdgeMax
TM
Short Microcut
139-4319 EdgeMax
TM
Short Tournament
98-7260 Tournament
98-7261 Microcut
TRACTION UNIT ACCESSORIES
04135 LED Light Kit
04136 Push Broom Kit
139-4342 Backlap Access Kit
139-4368 Wireless Hour Meter Kit
99-4286 High Height of Cut Bracket
04123 Wheel Kit
CUTTING UNITS & REEL OPTIONS
04823 11-Blade DPA EdgeSeries™ Cutting Unit
04824 14-Blade DPA EdgeSeries™ Cutting Unit
ROLLER OPTIONS
04804 Interlaced Narrow Wiehle Roller
04814 Full Front Roller
04148 Extended Narrow Wiehle Roller
140-3362 Extended Narrow Wiehle Roller - Heavy
115-7361 Auxilliary Roller Extensions
SCRAPER/BRUSH OPTIONS
139-7411 Interlaced Roller Scraper Assembly
139-7412
Interlaced Roller Scraper Brush Assembly
120-9617 Full Roller Scraper Assembly
120-9673 Full Roller Scraper Brush Assembly
GROOMER OPTIONS
04707 Universal Groomer Drive
04268 Grooming Brush – Soft
04269 Grooming Brush – Stiff
04801 Twin Tip Groomer Blade Assembly
TOOLS
04399 Turf Evaluator
125-5610 Reel Paper – (10 Pack)
125-5611 Reel Shim
131-6828 Angle Indicator
131-6829 Angle Indicator Mount
94-9010 Height of Cut Bar
GREENSMASTER 1018 ACCESSORIES