User Manual

3
Rev. 7/20
The Greensmaster 1021 is manufactured
in Tomah, WI ISO 9002 Certified Plant.
Greensmaster
®
1021 Specifications
*
* Specifications and design subject to change without notice. Products depicted in
this literature are for demonstration purposes only. Actual products offered for sale
may vary in use, design, required attachments and safety features. Consult your local
Toro Distributor.
GREENSMASTER 1021, MODEL 04830
ENGINE
Honda GX120 - 3.5 hp (2.6 kW) @3600 rpm, gasoline with integral lighting coil.
FUEL CAPACITY
2.1 qts (2L)
FRAME
Fully modular design allows quick disassembly for service / maintenance of all major components.
TRACTION DRIVE
Full gear drive transmission with integral traction differential and traction drive disconnect to ease movement during service / maintenance operations.
Interchangeable drum drive gear cases.
TRACTION DRUM
Dual position traction drum with positions for contour following or forward weight bias at higher heights of cut.
GROUND SPEED
Mowing Speed: 2.0 mph (3.2 km/h) to 3.5 mph (5.6 km/h) Transport Speed: 5.3 mph (8.5 km/h)
CLUTCH
Externally-mounted two sided dry disc clutch actuated by dual motion bail.
BRAKE
Service / parking – band type.
CUTTING UNIT DRIVE
Quick change dual speed gear drive.
CUTTING UNIT ATTACHMENT
Detachable cutting unit allows easy removal for service / maintenance or cutting unit exchange for different uses.
CUTTING UNIT OPTIONS
8-blade cutting unit 11-blade cutting unit 14-blade cutting unit
CONTROLS
Engine mounted: recoil starter, choke, fuel shutoff.
Handle mounted: on/off switch, throttle lever, dual motion traction / safety bail, reel engage lever, service/park brake lever, hour meter, light switch (optional).
HANDLE
Loop handle with telescoping adjustment with 5" (12.7 cm) total travel, rubber isolated to minimize operator influence during mowing.
TRANSPORT TIRES / KICKSTAND
Optional – Two, quick-detachable pneumatic tires (3.00X3.25-6). Kickstand is standard.
WIDTH OF CUT
21" (53.3 cm)
HEIGHT OF CUT RANGE
For Greens: (Drum Position One) 0.062" to 0.312" (1.5 mm to 8 mm)
For Tees: (Drum Position Two) 0.25" to 0.625" (6 mm to 16 mm)
High Height of Cut Kit: (Drum Position Two) 1.18" (30 mm)
WEIGHT
224 lbs (100 kg) with 11-blade cutting unit, aluminum Wiehle roller.
MAINTENANCE REQUIREMENTS
No daily greasing required. On board backlapping available with optional kit.
CERTIFICATION
Designed in accordance to applicable ANSI and CE specifications.
WARRANTY
Two-year limited warranty. Refer to the Operator’s Manual for further details.
BEDKNIFE OPTIONS
115-1880 EdgeMax
TM
Microcut (standard)
108-4303 Extended Microcut
108-4302 Extended Tournament
115-1881 EdgeMax
TM
Tournament
139-4320 EdgeMax
TM
Short Microcut
139-4321 EdgeMax
TM
Short Tournament
63-8610 Fairway
93-4262 Microcut
93-4263 Tournament
93-4264 Low Cut
94-6392 High Cut
TRACTION UNIT ACCESSORIES
04135 LED Light Kit
04136 Push Broom Kit
139-4342 Backlap Access Kit
04800 Backlap Kit
139-4369 Wireless Hour Meter Kit
99-4286 High Height of Cut Bracket
04123 Wheel Kit
CUTTING UNITS & REEL OPTIONS
04832 8-Blade DPA EdgeSeries™ Cutting Unit
04833 11-Blade DPA EdgeSeries™ Cutting Unit
04834 14-Blade DPA EdgeSeries™ Cutting Unit
ROLLER OPTIONS
04805 Interlaced Narrow Wiehle Roller
04815 Full Front Roller
04141 Extended Narrow Wiehle Roller
04267 Paspalum Wiehle Roller
04249 Split Front Roller – Full
04250 Split Narrow Wiehle Roller
04825 Wide Wiehle Roller
115-7361 Auxiliary Roller Extension Kit
140-3363
Interlaced Narrow Wiehle Roller – Heavy
SCRAPER/BRUSH OPTIONS
139-4383
Interlaced Narrow Wiehle Roller
Scraper/Brush
139-4385
Interlaced Narrow Wiehle Roller
Scraper
115-7378 Wide Wiehle Roller Scraper/Brush
125-3504 Wide Wiehle Roller Scraper
115-7379 Full Roller Scraper/Brush
125-3505 Full Roller Scraper
GROOMER OPTIONS
04707 Universal Groomer Drive
04270 Grooming Brush – Soft
04271 Grooming Brush – Stiff
04802 Twin Tip Groomer Blade Assembly
TOOLS
04399 Turf Evaluator
125-5610 Reel Paper – (10 Pack)
125-5611 Reel Shim
131-6828 Angle Indicator
131-6829 Angle Indicator Mount
94-9010 Height of Cut Bar
GREENSMASTER 1021 ACCESSORIES