Manualshelf

Installation Guide

ManualsBrandsUnbranded ManualsBathRampart 4 ft. Walk-in Non-Whirlpool Bathtub with 4 in. Tile Easy Up Adhesive Wall Surround in White
78910111213141516
RAMPART WALL - Total Wall Surround Installation
INSTALLATION
5701 NW 35th Ave. Miami, FL 33142 • 1-877-360-4454 • www.UNIVERSALTUBS.com
PLACE AGAINST WALL AND APPLY CAULKING
Once the silicon has been applied it is time to apply the back wall
RAMPART WALL SURROUND panel to the wall.
Before you do please ensure once again that the wall’s surface is
clean, dry and free of any soap, oil or greasy residue.
When the panel is applied to the wall make sure the edges line up.
Also push on the panel to ensure the adhesive tape fully adheres
to the wall surface.
The adhesive tape will securely hold the panel in place while the
silicon cures and hardens. This process is estimated to take on
a few minutes but it is highly recommended to allow at least 24
hours to pass before running any water in the bathtub/shower.
Run Caulking Along the indicated Edges.
CAULKING