Installation Guide



1420 Terry Ave Unit 1601

Seattle, WA 98101

425 405 5505

inlinedesign.us

Installing Stainless Steel Handrail Wall Bracket

Round Slim

Overview

These instructions will provide step-by-step installation

guidelines for installing the Stainless Steel Handrail Wall

Bracket Round Slim, HBWA.006 into wood, drywall or

sheetrock

These brackets come with a wall bracket screw/hanger bolt to

attach to the wall, and an M6 bolt to attach to a handrail

Brackets should be installed at a maximum spacing of 4’

Caution: Wear protective ANSI approved safety glasses,

working gloves and breathing mask at all times

Tools Required

Stud-ﬁnder

Handheld drill

3/16” drill bit

13mm wrench

2.5mm hex wrench

This document includes hyperlinks and is intended to be viewed as a PDF ﬁle rather than print material

Page of 1 3

HBWA.006

PAGE 1
420 Terry Ave Unit 1601 Seattle, WA 98101 425 405 5505 inlinedesign.us Installing Stainless Steel Handrail Wall Bracket Round Slim Overview 1 These instructions will provide step-by-step installation guidelines for installing the Stainless Steel Handrail Wall Bracket Round Slim, HBWA.006 into wood, drywall or sheetrock HBWA.
PAGE 2
1420 Terry Ave Unit 1601 Seattle, WA 98101 425 405 5505 inlinedesign.us Part 1: Install the Wall Bracket 1) Using a stud-finder, locate a stud and spot drill using 3/16” drill bit (this is true for wood or steel/metal stud) 2) Loosen the 2.
PAGE 3
1420 Terry Ave Unit 1601 Seattle, WA 98101 425 405 5505 inlinedesign.