Use and Care Manual

If the generator has been unused for a while, and you’re starting it for the first time, turn the engine

switch knob to the ON position for 10-20 seconds before starting, so the gasoline can enter the

engine carburetor.

Do not ever, under any circumstances, use this generator in an indoor, closed environment. The

fumes will cause asphyxiation and death. Always use this generator in a well-ventilated environment.

Follow these steps to start the engine on your generator:

1. Rotate the tank cap switch to the ON position.

NOTE: When you transport the generator, always make sure the fuel tank cap switch is cranked

into the OFF position.

2. Turn the generator engine switch knob to the CHOKE position. In this position, the choke will be

fully closed

NOTE: If the engine is hotter after starting, or the ambient temperature in the area is higher

than normal, you should turn the engine switch knob to the ON position, rather than CHOKE.

Tank Cap Switch

Fuel Tank Cap Body