Use and Care Manual

WARNINGS:

Do not use gasoline or low-ignition-point solvents for cleaning. They are flammable and explosive

and this is just not a good idea when dealing with a combustion engine.

Never run the generator without the air filter. This will quickly abrade the engine.

Follow these steps to safely and properly replace the air filter in your generator:

1. Loosen the air filter maintenance cover screws and remove the air filter maintenance cover.

2. Snap open the air filter cover and remove it.

3. Take out the air filter element and clean it with non-flammable or high-flash-point solvent (e.g.,

kerosene or motorcycle engine oil), and then dry it fully.

4. Clean the air filter element with clean oil, and then squeeze out the excess oil.

Air Filter & Oil Maintenance Cover

Maintenance Cover

Screw

Filter Element

Air Filter Cover

Screw