Instructions / Assembly

Assembly Instruction
1. Identify all parts packed in carton against the parts list. Remove all protective material carefully and
avoid cutting the surface of the furniture while removing the bubble wrap.
2. Put the table top upside down a flat surface. Attach the legs with Studs, washers and lock washers and
nuts, don’t tighten at this time.
3. Connect the legs with the Center Rings, tighten with washers,lock washers and nuts. Progressively
tighten all the bolts until secure.
4. Turn the table on its legs, you can adjust foot plugs to level table if needed.
Parts List
Description
Quantity
Table Top
1
Table Leg
4
Center Ring
4
Short Stud
4
Washer
12
Lock Washer
12
Locker Nut
12
Warning: Do not force components and over tighten during assembly.

Summary of content (1 pages)