User Manual Model HDCM3 8” HD IPS LED Monitor
Introduction Congratulations on your purchase of the Triplett HDCM3 HD IPS (In-Plane Switching) LED Monitor. The Triplett HDCM3 8” HD IPS LED Monitor is a multi-purpose ruggedized HD LED monitor. It can be used for temporary or permanent connection to any NVR, DVR, Cable/Satellite box, computer, or other video source that has an HDMI, AV, VGA, or BNC connection.
Specifications Model HDCM3 Display Screen Aspect Ratio 8” IPS LED 16:9 Native Resolution 1280 x 720 Contrast 1000:1 Brightness 450cd/m2 Response Time < = 12ms Viewing Angle Wide 178° (78 x78) Frequency 60-75 Hz Signal Input AV / BNC / VGA / HDMI Backlight LED Analog Interface PAL/NTSC HDMI Format (Full HD-HD) 1080p, 1080i,720p, 576p,576i, 480p, 486i Speaker Built-in Operating Temperature -10 degrees Celsius to 60 degrees Celsius Language English, Spanish, Russian, Portuguese, Dutch,
Screen Cleaning & General Care Do not use solvents when cleaning the screen as they may cause damage; clean with a soft cloth. Do not expose the Monitor to wet/damp/humid, dusty, or excessively hot or cold environments or leave it in direct sunlight. Make sure all connections are free of dirt and debris at all times. Do not block vents. Only use the supplied power supply. Turn power off when not in use.
NOTE: To charge the battery, plug in the AC adapter and turn the Battery Engage/Disengage Switch to the ON position.
Monitor Stand Installation TOOLS You will need a long, narrow flat-head screwdriver that has a magnetic tip. You will also need to be in a well-lit area. Step 1: Unboxing & Parts** The stand ships in two separate pieces—the Base and the Tilt Adjuster—and must be assem-bled before use. Remove both parts from your case. The Base is the piece with a bottom that is shaped like a boomreang.
Warranty Information Triplett / Jewell Instruments extends the following warranty to the original purchaser of these goods for use. Triplett warrants to the original purchaser for use that the products sold by it will be free from defects in workmanship and material for a period of (1) one year from the date of purchase.
