Item #1000 991 173 US Model #HDGEFS4 USE AND CARE GUIDE PREMIUM HOUSEHOLD WATER FILTRATION SYSTEM System tested and certified by NSF International against NSF/ANSI Standard 42 for particulate class III reduction. NSF Questions, problems, missing parts? Before returning to the store, call Glacier Bay Customer Service 7 a.m. - 6 p.m., CST Monday - Friday 1-800800-247247-1087 HOMEDEPOT.COM/ HOMEDEPOT.
Table of Contents Package Contents ....................................... 6 Installation ............................................. 7 Filter Cartridges .................................... 9 Filter Cartridge Life ...................................... 9 Filter Cartridge Replacement ....................... 9 Troubleshooting .................................. 11 Replacement Parts .............................. 11 Safety Information .................................2 Warranty .............................
Warranty Glacier Bay Water Filtration SystemsSystems- Warranty Glacier Bay Water Filtration Systems are manufactured under the highest standards of quality and workmanship. Glacier Bay Water Filtration Systems warrants to the original purchaser that this system will be leak and drip free during normal domestic use for a period of one (1) year from date of purchase.
Pre-Installation PREPRE-INSTALLATION INSPECTION INSPECTION Thoroughly check the water filtration system for possible shipping damage and parts loss. Also inspect and note any damage to the shipping carton. Remove and discard (or recycle) all packing materials. To avoid loss of small parts, we suggest you keep the small parts in the parts bag until you are ready to use them. INSTALLATION LOCATION LOCATION WARNING:: Electrical Shock Hazard.
Pre-Installation (continued) DIMENSIONS 10-5/8 in. 10-5/8" Inlet 3-3/4 in. 3-3/4" Outlet 1 in. NPT 1 in. NPT 16” 16" 5-1/4 5-1/4"in. 7-1/2 in. 7-1/2" 14 14"in. 12 in. 12" SPECIFICATIONS Rated Service Flow Rate @ 60 psi (414 kPa) Pressure Drop @ 30 psi (207 kPa) Water Pressure Limits (minimum / maximum) Water Temperature Limits (minimum / maximum) 9.0 gpm (34.0 L/min.) 2 psig (13.
Pre-Installation (continued) TOOLS REQUIRED Sealant tape Wrench PACKAGE CONTENTS B C E A D Part Description Quantity A Filtration system 1 B Mounting bracket with 2 screws 1 C Adaptor (1 in.
Installation Attaching the adaptors and clips to the filter 1 2 □ Insert the adaptors (C) into the holes on each side of the filter head (A). □ Secure in place with the clips (D). Ensure all three tabs of the clips (D) go through the matching holes and fully into the channels on the adaptor (C). D Mounting the filter IMPORTANT:: To operate properly, you must install this filtration system in a vertical orientation.
Installation (continued) 3 4 Connecting the water supply lines IMPORTANT:: Do not solder the metal plumbing while attached to plastic installation adaptors. Solder heat will damage the adaptors. Installing the vent tube IMPORTANT:: The vent tube works using gravity. Do not elevate it above the vent port. Route it downward to the drain point with no humps, dips, or loops. Seal the inlet (1) and outlet (2) threads of the filter adaptors with several wraps of sealant tape.
Filter Cartridges USE GLACIER BAY REPLACEMENT REPLACEMENT FILTER HDGEFF4 HDGEFF4 FILTER CARTRIDGE LIFE LIFE Replace the filter cartridge every six months. There are several variables that determine how long a cartridge will last. These include: 1. How much water you use, and 2. How much sediment, taste and/or odor, or other unwanted substance, is in the water.
Filter Cartridges (continued) 5. Remove the used filter cartridge from the sump. If you have difficulty removing the cartridge from the sump, insert a screwdriver into the slot and pry up. Dispose of the used cartridge properly. NOTE Check the sump to ensure it is dry and free of debris. 6. Take the new filter cartridge out of its packaging and remove the protective caps from the ports. Filter cartridges can only be installed in one orientation, and are “keyed” to assure proper fit.
Troubleshooting Problem Possible Cause The replacement filter cartridge does not fit in the filter sump. The filter cartridge is not properly oriented. Solution Reorient the filter cartridge. The lid does not fit on the filter. The filter cartridge is not properly oriented. Reorient the filter cartridge. The lip clamp cannot be latched. The filter cartridge is not properly oriented. Reorient the filter cartridge. Water leaks from the adaptor at the threads. The seal in the threads is inadequate.
Questions, problems, missing parts? Before returning to the store, call Glacier Bay Customer Service 7 a.m. - 6 p.m., CST Monday-Friday 1-800800-247247-1087 HOMEDEPOT.COM HOMEDEPOT.COM/GLACIER .COM/GLACIERBAY /GLACIERBAY Retain this manual for future use.