Instructions / Assembly

ManualsBrandsUnbranded ManualsOutdoorsRose Aluminium Round Outdoor Dining Table

Assembly Instructions

Caution : You must read this before you proceed.

CAST TABLE

CAUTION : This table is NOT a TOY.

Keep your child / children away during the process of assembly.

Do not use power tools for assembly.

REMINDER : In the event of intent to return, please disassemble by reversing the assembly

process and pack item into its ORIGINAL CARTON BOX with original packing materials.

Contact Oakland Living at service@oakland-living.com or call 1-866-656-8666 (M-F 10am to

5pm) for any questions, missing parts, or other customer service issue.

1 OF 4

Summary of content (4 pages)

PAGE 1
Assembly Instructions Caution : You must read this before you proceed. CAST TABLE CAUTION : This table is NOT a TOY. Keep your child / children away during the process of assembly. Do not use power tools for assembly. REMINDER : In the event of intent to return, please disassemble by reversing the assembly process and pack item into its ORIGINAL CARTON BOX with original packing materials. Contact Oakland Living at service@oakland-living.
PAGE 2
No. Picture Description Qty Table Top 1 Leg Support Panels 4 Table Legs 4 Description Qty Studs(M8*40mm） 12 Washers ( 8mm ) 12 Springs Washers ( 8mm) 12 Nuts ( 8mm ) 12 J Screwdriver 1 K Wrench 1 A B C No.
PAGE 3
Step 1 Unpack and place all parts on a clean soft surface. Note : It is recommended that you have a partner to assist in the assembly process. Step 2 Place the Table Top(A) with the underside facing up. Fit the Studs(D) by turning into the 4 holes on the underside of Table Top(A) with the Screwdriver(J). Tighten only to snug fit. Similarly, fit 8 Studs(D) into holes in legs (2 per leg, not pictured). DO NOT OVERTIGHTEN AS YOU MAY DAMAGE THE THREADS.
PAGE 4
Step 4 NOTE : Please see that the Leg Support Panels(B) have 2 types of ends (1# and 2# in photo above). 1# style end should be closest to leg (has cutout on inner surface). 2# style end should be closest to Nut (has cutout on outer surface). By design, the LEGS SUPPORT PANELS WILL OVERLAP AT ALL 4 (four) CORNERS, giving you maximum stability. First, place the Leg Supports(B) with end style 1# onto the studs of the legs. Then place leg support with end style 2# onto the studs.