Use and Care Manual
11
Note: Remote control can be used only when the main power switch
is on. Aim the remote control at the remote receiver (see picture on
page 9) which is on the le of the main power switch
NOTE: A coin cell (CR2032) should be used for this remote but it is NOT
included in the package in consideraon of the transportaon safety,
please source it locally.
The power buon will put the unit in standby
mode. This will turn off all funcons and hold
the sengs in memory, press the power buon
again will turn on the unit to previous sengs.
For the first me use, Flame A will be turned on.
5b. Remote Control
BUTTON TITLE FUNCTION
POWER
POWER
LOW
HIGH
CRACKLING
POWER