Use and Care Manual

13
ALWAYS turn the heater OFF and unplug the power cord from
the outlet before cleaning, performing maintenance, or
moving this replace. Failure to do so could result in electric
shock, fire, or personal injury.
Cleaning
NEVER immerse in water or spray with water. Doing so could
result in electric shock, fire, or personal injury.
Metal:
Ÿ Bu using a so cloth, slightly dampened with a citrus oil-based
product.
Ÿ DO NOT use brass polish or household cleaners as these products
will damage the metal trim.
Glass:
Ÿ Use a good quality glass cleaner and dry thoroughly with a paper
towel or lint-free cloth.
Ÿ NEVER use abrasive cleansers, liquid sprays, or any cleaner that
could scratch the surface.
Plasc:
Ÿ Wipe gently with a slightly damp cloth and a mild soluon of dish
soap and warm water.
Ÿ NEVER use abrasive cleansers, liquid sprays, or any cleaner that
could scratch the surface.
Vents:
Ÿ Use a vacuum or duster to remove dust and dirt from the heater and
vent areas.
Ÿ Clean the exterior of the replace with a slightly damp cloth or
duster.
6. CARE AND MAINTENANCE