Installation Guide

Inferno Armor 32 oz Spray Bottle Installation Guide

Thank you for choosing Inferno Armor for your fire protection needs. Our 32 oz spray bottle is designed

for easy use and effective fire prevention. This guide provides step-by-step instructions on how to

prepare your Inferno Armor spray bottle for use.

Tools Required:

• Inferno Armor 32 oz Bottle, Filled

(included)

• Nozzle with straw (included)

Installation Steps:

1. Prepare the Nozzle:

• Locate the nozzle with the attached straw. This is the dispensing mechanism for your

spray bottle.

2. Remove the Cap:

• Grasp the cap of the spray bottle and twist it counterclockwise.

• Remove the cap and set it aside.

3. Attach the Nozzle:

• Take the nozzle and ensure the straw is pointing downwards.

• Align the nozzle with the top of the bottle.

• Insert the straw into the bottle, ensuring it reaches the bottom to utilize all the liquid.

• Secure the nozzle by twisting it clockwise, similar to fastening a water bottle cap. Ensure

it is snug but do not overtighten.

4. Activate the Spray Function:

• Locate the nozzle's twist mechanism.

• Turn the nozzle to the "ON" position to allow for spraying.

5. Using the Spray:

• Aim the nozzle at the desired area for application.

• Press the trigger to release the spray, applying evenly across surfaces as needed.

• For optimal coverage, maintain a consistent motion and distance while spraying.

(Cont.)

PAGE 1
Inferno Armor 32 oz Spray Bottle Installation Guide Thank you for choosing Inferno Armor for your fire protection needs. Our 32 oz spray bottle is designed for easy use and effective fire prevention. This guide provides step-by-step instructions on how to prepare your Inferno Armor spray bottle for use. Tools Required: • Inferno Armor 32 oz Bottle, Filled (included) • Nozzle with straw (included) Installation Steps: 1. Prepare the Nozzle: • Locate the nozzle with the attached straw.
PAGE 2
6. After Use: • Once application is complete, turn the nozzle to the "OFF" position to prevent accidental discharge. • If there is any remaining product, ensure the cap is securely replaced for storage. _____________________________________________________________________________________ Storage and Maintenance: • Store Inferno Armor products in a location where the temperature is consistently above 32 degrees Fahrenheit (0 degrees Celsius) to prevent the liquid from freezing.