Use and Care Manual

Inferno Armor Care and Use Manual
Introduction Welcome to Inferno Armor, your solution for advanced re protection. This manual
provides essential information on how to use and care for your Inferno Armor product eectively.
How to Use Inferno Armor
1. Preparation: Ensure the surface is clean and dry before application.
2. Application: Shake the bottle well. Spray evenly over the surface from a distance of 6-10
inches, ensuring complete coverage.
3. Drying: Allow the surface to air dry completely. Inferno Armor will form a protective barrier
once dry.
4. Reapplication: For continuous protection, reapply Inferno Armor after heavy wear or
washing of the treated surface.
Storage Tips
• Store Inferno Armor in a cool, dry place away from direct sunlight.
• Ensure the cap is tightly sealed after each use to prevent the product from drying out.
• Do not expose the product to temperatures above 120°F (49°C) or below 32°F (0°C).
Maintenance Tips
• Regularly check the surface for signs of wear or diminished protection. Reapply Inferno
Armor as needed.
• If the bottle becomes clogged, rinse the nozzle with warm water to remove any residue.
• Dispose of empty Inferno Armor containers in accordance with local waste management
regulations.
Safety Information
• Keep Inferno Armor out of reach of children and pets.
• Avoid contact with eyes and skin. In case of contact, rinse thoroughly with water.
• Do not ingest. If swallowed, seek medical attention immediately.
Emergency Procedures
• In case of a re, use Inferno Armor as directed to suppress ames. If the re persists, call
emergency services immediately.
• For any adverse reactions during the use of Inferno Armor, discontinue use and consult a
healthcare professional.
Customer Support For further assistance or inquiries about Inferno Armor, please contact our
customer support team at [e-mail]