Installation Guide

‘How To’ Installation Guide
Page 1 of 4
JD IRVING - Rustic Accent Barn Boards
J D Irving, Limited Rustic Hardwood Accent Boards are a genuine wood product.
Easily and economically turn an ordinary room or project into something extra-ordinary and modern
with the warmth and charm of wood. Each piece is completely different to provide a unique finished
look. Each board is pre-finished with an environmentally friendly water based stain on all 6 sides to give
your customer various options for final installation.
These boards can be used for various projects. The most common projects are accent walls using various
pattern styles (such as horizontal, vertical, 45⁰ degree angle, or block style) wainscoting, ceilings, home
entertainment wet bar décor accent.
This product is intended for interior use only. It may be used for exterior applications providing the
surface is sealed with a clear satin exterior sealer with UV inhibitors, but the product will fade over time
with exposure to the elements.
 Installation Tools Recommended
o clean work area or work bench
o safety glasses
o ear plugs
o dust mask
o stud finder
o tape measure
o 4’ foot level
o electric or traditional miter box/saw
o pencil
o Touch-up paint - color match at your local building supply paint counter.
o foam brush or small paint roller
o nails or screws
o wall anchors (in case studs cannot be found)
o hammer, air-nailer or screw gun
o construction adhesive
o caulking gun