Installation Guide

Install the Spout (cont.)
Threaded Spout
Apply thread sealant and install a 1/2” NPT nipple to extend
4–1/2” (11.4cm) beyond the finished wall.
Apply plumbers putty or other sealant, according to the putty
manufacturers instructions, around the base of the escutcheon,
leaving a small gap free of putty at the bottom of the escutcheon.
Apply thread sealant to the nipple and install the spout to the
nipple.
Carefully tighten the spout with a clean strap wrench.
Remove any excess putty.
1018256-2-A 4 Kohler Co.