Installation Guide

1. Prepare the Site
CAUTION: Risk of property damage. To support the bedpan
washer and piping, provide sufficient reinforcement or
mounting brackets as required inside the finished wall.
Refer to the ″Roughing-In″ section for your particular model.
Plumb using 1/2″ NPT pipe, or 3/8″ NPT pipe, or 1/2″ copper
tubing, elbows, and adapters. Secure the piping to reinforcements
in the wall.
Provide pipe holes in the wall according to the roughing-in
diagram.
Complete the finished wall.
Kohler Co. 5 1034416-2-B