Instructions / Assembly

ManualsBrandsUnbranded ManualsTools & HardwareLincoln ElectricClassic 300 HE Kubota EPA Tier 4 Engine Driven Stick Welder/Generator Ready-Pak

GENERAL OPTIONS

Power Plug Kit

Provides two 115V plugs rated

at 20 amps each, and two 230V

plugs rated at 15 amps each. 115V

plugs may not be compatible with

common household receptacles.

Order K802D

Spark Arrestor Kit

Attaches to muffler exhaust tube.

Virtually eliminates spark emissions.

Order K903-1

Medium Welder Trailer

For heavy-duty road, off-road, plant

and yard use. Includes pivoting jack

stand, safety chains, and 13 in.

(330 mm) wheels. Stiff .120 in.

(3.0 mm) welded rectangular

steel tube frame construction is

phosphate etched and powder

coat painted for superior rust and

corrosion resistance. Low sway

suspension gives outstanding

stability with manageable tongue

weight. Wheel bearings are packed

with high viscosity, high pressure,

low washout Lubriplate

grease.

Includes a Duo-Hitch

– a

2 in. (51 mm) Ball/Lunette

Eye combination hitch. Overall

width: 60 in. (1524 mm). Overall

length 124 in. (3150 mm).

Order:

K2636-1 Trailer

K2639-1 Fender & Light Kit

K2640-1 Cable Rack

Stainless Steel Sheet Metal Kit

Stainless steel roof and doors. Also

includes decals (mounted), door

latches, door hooks, bumpers and

all required mounting hardware. Fits

K6090-9 and -10 Pipeliner

200D

and K1643-1 thru -11 Classic

300D, Classic

300 HE, SAE-300

SAE-300

HE.

Order K2423-1

STICK OPTIONS

Accessory Kit

For stick welding. Includes 35 ft.

(10.7 m) 2/0 electrode cable with

lug, 30 ft. (9.1 m) 2/0 work cable

with lugs, headshield, filter plate,

work clamp and electrode holder.

400 amp capacity.

Order K704

Remote Control

Remote control rheostat permits

machine output changes up to

100 ft. (30 m) from the machine.

Includes local/remote switch and

receptacle for older machine control

panels.

Order K924-4

TIG OPTIONS

PTA-26V TIG Torch

Air-cooled 200 amp torch equipped

with valve for gas flow control.

25 ft. (7.6 m) length.

Order K1783-9

Magnum

Parts Kit

for PTA-26V TIG Torch

Magnum

Parts Kit provides all the

torch accessories you need to start

welding. Parts kit provides collets,

collet bodies, a back cap, alumina

nozzles and tungstens in a variety

of sizes, all packaged in an easy to

carry reclosable pack.

Order KP509

TIG Module

Portable, high frequency unit with

gas valve for TIG welding. Rated

at 300 amps/60% duty cycle.

Order K930-2

Control Cable

Connects welder and TIG Module

controls.

Order K936-4

Control Cable Extension

Allows the TIG Module to be

operated at distances up to 200 ft.

(61.9 m) from the power source.

45 ft. (13.7 m) length.

Order K937-45

Arc Start

™

Switch

Needed if an Amptrol

™

is not used

when TIG welding. Comes with a

25 ft. (7.6 m) cable. Attaches to

the TIG torch for convenient

finger control.

Order K814

Contactor Kit

For use with TIG Module and

Classic

300D.

Order K938-1

WIRE FEEDER OPTIONS

Wire Feed Module

Provides constant voltage (CV)

output with excellent arc stability

for Innershield

welding and

MIG welding. Easy installation.

Recommended wire feeder is

the LN-25 Ironworker

™

Order K3964-1

Remote Control Kit

(Stick & Wire)

For Classic

and Pipeliner

machines that have the wire feed

module. Contains a rheostat for

stick output, a potentiometer

for wire output and 100 ft. (30 m)

of control cable.

Order K2464-1

LN-25 Ironworker

™

Wire Feeder

Portable CV unit for flux-cored and

MIG welding with MAXTRAC

wire

drive system. Includes digital meters

for wire feed speed/amperage

and voltage, gas solenoid, internal

contactor and 5/64 in. (2.0 mm)

drive roll kit for cored wire. Has 83%

reduced wire feed speed capability

for 6 o’clock pipe welding with

Innershield

wire.

Order K2614-9

K126

™

PRO Innershield

Gun

For self-shielded wire with 15 ft.

(4.5 m) cable. For .062-5/64 in.

(1.6-2.0 mm) wire. Includes

K466-10 Connector Kit.

Order K126-12

Drive Roll and Guide Tube Kit

For .068-.072 in. (1.7-1.8 mm)

cored or solid steel wire.

Order KP1697-068

Magnum

PRO 350 Ready-Pak

15 ft., .035-5/64 in.

Magnum

PRO MIG/flux-cored

welding guns are rated 100%

duty cycle. The guns are designed

for high amperage, high duty

cycle applications in extreme

environments where heat-resistance

and fast serviceability are key.

Order K2652-2-10-45

Drive Roll and Guide Tube Kit

For .035 in. and .045 in. (0.9 mm

and 1.1 mm) solid steel wire.

Order KP1696-1

Magnum

SG Spool Gun

Hand held semiautomatic wire

feeder. Requires SG Control Module.

Order K487-25

SG Control Module

The interface between the power

source and the spool gun. Provides

control of the wire speed and gas

flow. For use with a spool gun.

Order K488

Input Cable

(For SG Control Module)

For Lincoln engine power sources

with 14-pin MS-type connection,

separate 115V NEMA receptacles

and output stud connections.

Order K691-10

Classic

300 HE | [ 5 ]

RECOMMENDED ACCESSORIES

115 Volt

Shown with optional

K2639-1 Fender &

Light Kit