INSTALLATION GUIDE FOR ALL TOP MOUNT SINKS www.exclusiveheritageusa.
INSTALLATION Instructions Attention Installer Please carefully read our installation guide prior to installation. Make sure you have observed your local plumbing and building codes thoroughly before you begin. • Metal edges may be sharp, please use caution when handling. You should always wear gloves. • Carefully unpack your new sink and make sure all necessary parts are included (sink, mounting brackets and cutting template). If any items are missing, contact us within 5 days of delivery.
RECOMMENDED TOOLS AND MATERIALS NEEDED Drill & Drill Bits Channel Locks Phillips Screwdriver Adjustable Wrench Rubber Mallet Caulk and Caulk Gun Tape Measure Tape SILICONE Jig Saw Denatured Alcohol Tubing Cutter Denatured Alcohol Protective Gear Please always wear personal safety devices for your protection and use proper tools for installation.
TOP MOUNT SINK APPLICATION STEP 1 - Check Flatness of countertop & Cabinet Clearances Exclusive Heritage top mount sinks are designed to be installed as a “drop in” via an opening on the countertop. Therefore, the countertop is normally installed first. (Figure 1) • Use a level to check that the countertop is reasonably flat. • Verify adequate cabinet clearances to allow installation of plumbing, drain pipes, garbage disposal, strainer, faucet, etc.
TOP MOUNT SINK APPLICATION STEP 3 - Cutout Countertop & Dry Fit • Drill a starter hole near the cutout line. The drill hole must be large enough to allow the jigsaw blade to fit through. (Figure 3.1) • Use a jigsaw with appropriate saw blade to cut the countertop opening along the cutout line. Different countertop materials may require different cutting method. Professional consultation is recommended. (Figure 3.2) Figure 3.
TOP MOUNT SINK APPLICATION STEP 5 - Install Top Mount Sink on Countertop • Use a rag and denatured alcohol to clean the top edge of the countertop opening. Also clean the underside rim of the sink to remove any dirt or residues. (Figure 5.1) • Apply a small bead of silicone caulk around the countertop opening where the sink rim overlaps the countertop. • Place the sink into the opening and align the sink evenly around all four edges. (Figure 5.
Stainless Steel Strainer 1 OPEN / CLOSE STOPPER 2 STRAINER BASKET 3 STRAINER BODY 4 RUBBER GASKET 5 PAPER WASHER 6 LOCKNUT 1 2 3 4 5 6 NOTE: • Installation of the strainer must be completed by a professional licensed plumber. • Always wear proper safety gear to protect yourself from injury. For questions and comments, please contact us at support@ehhomeusa.com. To learn more about Exclusive Heritage or our product line, you can visit our website at http://www.exclusiveheritageusa.com.
OUR STORY The late 1930’s and early 1940’s were a period of turmoil and uncertainty. Many of the lifelong dreams of hard working men and women came crashing down as World War II took its toll. My grandfather was one of many men who took pride in what he could create with his bare hands, his vision and his imagination. As an accomplished carpenter for most of his life, he knew the characteristics of great furniture making. He appreciated detail, fine tools, intricate inlays and master craftsmanship.
OUR PRODUCTS There are so many interesting ways to bring together today’s tools with our traditional craftsmanship skills. Imagine how inspiring the creations must be. We value quality, history and elegance to bring you today’s diverse product lines. Although each piece is unique, it carries the tradition of the noble pursuit of my grandfather and others of his same generation.
www.exclusiveheritageusa.