Replacement Part List

7
SHOWER SYSTEM
trapezoid-perforated anchoring legs for
installation on walls in conjunction with the
tile. Schluter
®
-SHELF-N is a rectangular shelf
that fits the prefabricated Schluter
®
-KERDI-
BOARD-SN shower niche. It is installed in
conjunction with the tile.
Material Properties and
Applications
Schluter
®
-SHELF is produced using stainless
steel 304 (1.4301 = V2A) and is resistant
to most chemicals encountered in tiled
environments. In special cases, the suitability
of a proposed type of material must be
verified based on the anticipated chemical,
mechanical, and/or other stresses. Exceptions
and special considerations are listed below.
Stainless steel can sustain high mechanical
stresses and is particularly suitable for
applications requiring resistance against
chemicals and acids. However, even stainless
steel is not resistant to all chemical stresses,
and may be affected by hydrochloric and
hydrofluoric acid or certain chlorine, chloride
and brine concentrations, which may be
present in detergents or swimming pools.
Maintenance
Schluter
®
-SHELF require no special
maintenance or care and is resistant to mold
and fungi. Clean shelves periodically using
neutral cleaning agents. Regular cleaning
maintains the neat appearance of stainless
steel and reduces the risk of corrosion. All
cleaning agents must be free of hydrochloric,
hydrofluoric acid, and chlorides. Stainless
steel surfaces develop a sheen when treated
with a chrome-polishing agent.
Schluter
®
-KERDI-FIX Technical Data
Color Grey or bright white
Basic raw material Silyl-modified polymer (SMP)
Specific weight Approx. 93.6 lb/ft
3
(1.5 g/ml)
Solvent content 0%
Isocyanate content 0%
Dry materials content Approx. 100%
VOC emissions 0.0 mg/m
3
Shear strength beech wood/beech wood Approx. 435 psi (3 N/mm
2
)
Shear strength aluminum/aluminum Approx. 290 psi (2 N/mm
2
)
Elongation at failure Approx. 200%
Skinning About 10 minutes
Curing 1/8" (3 mm) per 24 hours
Permissible total movement About 20%
Processing temperatures Don’t install at temperatures below 40 ºF (5 ºC)
Temperature stability
-40 ºF (-40 ºC) to 212 ºF (100 ºC), temporarily
356 ºF (180 ºC) [max. 30 minutes]
Moisture resistance Very good
Frost ability Not sensitive to frost
Cartridge volume 9.81 oz (290 ml)
Estimated coverage
5" (12.7 cm) connection
to fixed building elements
12' 10" (3.9 m) per cartridge
1/4" (6 mm) bead 30' 1" (9.2 m) per cartridge
Shower Profiles
Application and Function
14.2 Schluter
®
-SHOWERPROFILE-WS/-
WSK system profiles, together with the
Schluter
®
-SHOWERPROFILE-WSL/-WSC
inserts, form a splashguard at the entrance of
curbless showers.
Schluter
®
-SHOWERPROFILE-WS is an
anodized aluminum support profile that is
set in conjunction with the tile using thin-set
mortar. It has a 3/4" (19 mm) –wide visible
surface and a height of 5/16" (8 mm). Where
thicker tiles are used, simply fill the space
below the profile with thin-set mortar.
Schluter
®
-SHOWERPROFILE-WSK is an
anodized aluminum support profile that is
adhered to the tile surface. It has a 2-1/16"
(52 mm) –wide visible surface and a height of
5/16" (8 mm).
The support profiles are combined with either
the SHOWERPROFILE-WSL insert or the
SHOWERPROFILE-WSC insert.
Schluter
®
-SHOWERPROFILE-WSL is an
upright insert made of transparent
polyurethane. The insert is collapsible when
stepped on or rolled over with a wheelchair.
The insert protrudes 1-5/32" (29 mm) above
the profile surface. The SHOWERPROFILE-
WSL insert does not comply with the
Americans with Disabilities Act (ADA), since
it exceeds the allowable height of a vertical
transition despite being collapsible. Please
check with local code officials for acceptance
on projects where ADA guidelines must be
observed before installation.
Schluter
®
-SHOWERPROFILE-WSC is a semi-
circular insert made of semi-rigid PVC. The
insert creates an inconspicuous transition
from the shower area to the adjoining space
and a 5/8" (16 mm) –wide visible surface.
The insert protrudes 3/64" (1.2 mm) above
the profile surface. The SHOWERPROFILE-
WSC insert complies with the Americans with
Disabilities Act (ADA).
Material Properties and Areas of Application
The SHOWERPROFILE-WS/-WSK support
profiles feature an anodized aluminum layer
14.2 Schluter
®
-WSK/-WSC/-WSL
14.2 Schluter
®
-WS/-WSC/-WSL